Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
The learning curve was pretty quick once I started playing around with it. Immediately following activation, Ring puts you in a seven day trial period, which is great because I set off the alarm a handful of times because I wasn't used to having it. The trial period lets you use everything the way it's intended, except that when the alarm goes off it won't alert the monitoring company. You can end the trial mode at any point if you prefer to just get right into the full monitoring services.
Hi Rose! Thank you for such an informative article. Unfortunately, I’m reading due to the fact that my street was just the victim of car break-ins overnight. I am curious to know what your opinion on the night vision (inside and out) for each of the cameras is. I currently have the older Logitech Alert cameras, but their night vision isn’t the greatest so I really couldn’t make out the burglars or the vehicles they were in. I have been leaning on Ring doorbell/stick ups, but no 24/7 recording is almost scaring me away.
Thinking of battery-powered original Ring, I don’t think opening up the mount and recharging a battery every 3-6 months would faze me. Having two doorbells (the “real” one on the side and the Ring on the door frame) probably would bug me more than a little. It did not occur to me to move the existing doorbell, just to install the Ring in the new location on or near the door.
1. Correct. Geofencing is a free feature. I’m not sure what abode uses specifically, but generally, geofencing does require GPS or location services to be enabled. I know the system doesn’t use Bluetooth. My dad is using the system right now and he’s had problems with multi-user geofencing. I asked abode about it, but they just wanted to troubleshoot instead of discussing general performance. If I were to guess, I’d guess that it’s only using GPS to detect presence and not a combination of data like GPS and phone presence (Wifi).
Sightline is accessed from the mobile app. From the app, you can see your video history marked with color-coded activities. The colors represent different zones set by you. For example, a green dot might be driveway activity whereas an orange dot is an activity from your porch. If you own a Nest Secure security system, events triggered by the system will also show up in the Sightline as red dots or bars. You will also be able to see a “snapshot” of the event. Finally, using Sightline, you can swipe to fast forward through several days’ worth of footage.
Ring doesn’t offer free storage. While you will be able to see missed alerts, you won’t be able to view missed events without subscribing. The good news is that cloud storage is cheap. For $3 a month per device, you will be able to view and download up to six months of events. You will also be able to share clips, which is of vital importance if you want to use your video as evidence. If you have several Ring Cameras, you can subscribe to their Protect plan for $10 per month or $100 per year. This plan covers an unlimited number of Ring cameras and adds a lifetime product warranty. Beyond storage, all Ring features are free.
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
One major issue that I have is that I don't believe there is a duress code for this system. A duress code will disarm the system but also secretly send a notification that there is a problem to the monitoring company, who will send the police. The Ring system has a way of doing this that would make it obvious to an intruder that you're letting the police know there is a problem. The panel has two buttons with red dots on them. By pressing both buttons at the same time, the system will notify the Ring monitoring center that you need assistance. The problem is that the intruder will definitely see you do this instead of entering your code to disarm the panel. I can see where this may upset the intruder. I feel like Ring needs to step up and add a duress code feature so that you can be discreet about needing help.

If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
Well, I have not had any problems. This product works as advertised. Video freezes up occasionally but recovers quickly. I did move my router inside the house and went from -61 to -48. Camera resolution is acceptable and the IR emitters work well up to about 20 feet at night. Customer service is good (at least the one time I called them). I recommend this product. ADT installed our system and stand behind their work.

When you arm or disarm the system, the keypad and the base station play a female voice that informs you of the system’s status (the keypad’s speaker is unfortunately subdued). LEDs on both devices provide visual feedback as well, although only the base station gives you a constant visual cue as to the system’s status: Blue for unarmed, red for armed.
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.
Our 50 Series IP Cameras provide top of Our 50 Series IP Cameras provide top of the line picture quality day or night with the convenience of one cable operation and the reassurance of considerable weather and tamper proofing. The 5061IP is a dark gray bullet style internet protocol camera with a varifocal lens intended for use both ...  More + Product Details Close