The final alarm choice is Away, which engages all of your sensors by default and activates the external monitoring services as well. Much like with Home, you can opt to not include certain sensors if you want, and those settings are all controlled through the app. With both Home and Away modes, you can set an entry and exit delay, which is a buffer period that allows you to get in or out and disengage the alarm before the monitoring company calls.
Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.
The spotlight is provided by LED light strips on either side of a 140-degree wide-angle lens, which activate when motion is detected. The motion sensor, encased in a dome on the bottom of the camera, has a 270-degree detection range. The camera streams and records video in up to 1080p resolution and supports two-way talk with noise cancellation and night vision up to 30 feet.

At this point you have to verify your address if you choose to sign up for professional home monitoring, otherwise, just agree to the Terms of Service to continue. The next screen gives you the option of adding the included devices, all of which are pre-paired. I removed the battery tape from the contact sensor and it was added immediately. Here you can choose how the device will be used (door, window), give it a name, and assign it to a room (or choose No Room Assigned). I used the double-sided tape to install the sensor on a window, tested it, and moved on to the keypad.
My gate is too far from my router so I would prefer to hardwire the doorbell. I would rather not use an extender. I ran CAT5 when I installed my old doorbell (which is now outdated and does not have software to use on my iphone). Is my only option the Ring Elite? I have the Arlo set up indoor, but I was not sure if Arlo was going to make a doorbell. Any thoughts?
The aesthetic result of two devices mounted and connected by a wire isn’t overly pleasing. Thankfully, my setup is installed in a spot where it isn’t publicly visible. If it were on my porch, I would probably return the solar panel to use two batteries. That’s right, two! During the install, I was most surprised to find that though Spotlight Cam ships with one battery, it has room for two.
For the Ring Alarm to function properly, you'll need to subscribe to Ring's Protect Plus plan, which is $10 a month or $100 if you prepay for the year. It includes 24/7 professional monitoring, video recording, reviewing, and sharing for unlimited cameras, 10% off purchases made at Ring.com, and an extended warranty on all of your items as long as your subscribed.
Device Theft Optional Wall Mount Optional Wall Mount Screwed in using proprietary screws, Ring will replace stolen devices. Depends on the Mount – Quick Mount easier to steal, Security Mount is a more permanent solution. Easier to steal. The power adapter twists off and the Nest Cam can be removed from the magnetic base by pulling. Secure Mount (Sold Separately)
For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).

The Nest Guard motion sensor can detect motion within a 90° field of view up to 10 feet away. It also includes tamper detection as well as a proximity sensor (wakes on approach) and will let you know if it’s moved or if someone tries to jam your signal. However, in testing, I found that none of the promised tamper sensors worked. I did not test jamming detection.

So, is the Ring Alarm for you? If you're looking for a DIY alarm system that provides external monitoring and doesn't cost a fortune, I'd have to say that this is the option to consider. There is no shortage of great options out there from companies like Nest, SimpliSafe, and more, but they all come in much more expensive than this. At under $200 for the base package, it's really hard to beat what Ring is offering here.


I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.

As is the case with the Nest Secure system, the Ring Alarm does not support IFTTT applets or react to Amazon Alexa or Google Assistant voice commands. A Ring spokesperson has confirmed that support for voice commands and many other third-party devices is in the pipeline, and will include support for the soon-to-be-released new Ring Stick Up Cam, as well interoperability with other Ring devices.
Enjoy superior image quality courtesy of the 4MP Enjoy superior image quality courtesy of the 4MP sensor delivering twice the resolution of 1080p for stunning clarity. Wide Dynamic Range enriches your image quality with deep blacks contrasted whites and vivid colors so images appear true to life. Infrared LED's give you up to 100 ft. of night vision ...  More + Product Details Close
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
Swann Smart Security Camera is an indoor/outdoor battery powered security camera that works without a base station. It’s most similar to Reolink Argus and Canary Flex. The camera records in 1080p FHD, offers a 120° field of view, night vision, and is IP65 rated for outdoor use. Unfortunately, it doesn’t work with any third-party devices and it lacks intelligent features to reduce false alarms. The camera boasts a feature called True Detect™, but that’s just a fancy marketing term for PIR motion sensor. The camera’s best feature is free local and cloud storage. From the app, you can playback seven days worth footage stored locally. The camera also includes two days of cloud storage.

Ring finally unveiled its brand new security system in July and while their doorbell is tried and tested, the same can’t be said about their security system. Everything has to start somewhere, but it might not be worth risking your home security on a system that is bound to have some bugs and kinks to be worked out. When it comes to the safety of your family and home, you don’t want to take any chances. One great thing about this system is that they do offer monitored security, which is extremely important. It’s nice to be able to check up on things yourself, but it’s not your full time job to monitor your home. Leave it to pros who can monitor your home full time and who can immediately contact the authorities in the event of an emergency. Any home security system without this feature is honestly pretty worthless. Protect America also offers 24/7 professional monitoring.
The Ring Alarm system comes in an attractively packaged box that includes a square base station, a keypad, contact sensor, motion detector, and range extender. Unlike the Nest Secure home monitoring system, Ring created the hub and keypad as separate devices to give homeowners more control over where to place them. The products are both lightweight and durable, although the keypad digits do feel a bit antiquated when you press them.

First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
×