As of this writing, there are only a handful of add-on devices available that will work with the system, and for now, it doesn't support integrations with other Ring devices or third-party Z-Wave and Zigbee devices. That said, integration with Ring doorbells and cameras is on the way, and interoperability with third-party devices is also in the works.
Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.
The first step of installation involves simply plugging in the base station and hitting a pairing button on the back to start configuring the system via Bluetooth. The Ring app, which is getting a significant redesign to provide quick access to Ring Alarm and improve functionality for other Ring products, walks you through the entire setup process step-by-step, so it's hard to mess things up. Once the base station starts up, you can connect to your home network via either Wi-Fi or Ethernet, and I elected to use Wi-Fi to minimize wires.
Oco Pro Bullet is weatherproof, has an SD card, cloud storage, night vision, smart motion detection, and records in FHD 1080p. It can also work in a wide range of temperatures, from -22 °F – 140 °F (-30 °C – 60 °C). But it has one massive limitation: viewing angle. Unfortunately, it only offers an 85-degree viewing angle. Also, the indoor version fell flat on many of its promised features. While the outdoor camera uses different hardware, the indoor experience left me feeling leery towards Oco’s ability to build a quality camera.
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
For a long time, I used my indoor Nest Cam to film through my window. It was a makeshift outdoor camera supplemented by my Ring Video Doorbell. So it should come as no surprise that when Nest Cam Outdoor launched, I jumped at the opportunity to buy it. Since then, my search for an outdoor solution has continued to Canary Flex, Ring Spotlight Cam, Arlo Pro, Arlo Pro 2, Blink XT, Nest Hello, Reolink Argus, Argus 2, and a few that did not make the honorable mention list.
You can monitor the system yourself using the mobile app and web app, but that means you'll have to alert the police or fire department when there's a break-in or fire. Or, you can subscribe to the Ring Protect Plus monitoring plan. For $10 per month or $100 a year, you get 24/7 professional monitoring that includes police and fire department dispatch and push and email alerts. It also includes unlimited cloud recording for all Ring cameras, which makes it one of the best monitoring deals around.
The base station connects to Ring Alarm devices using Z-Wave Plus. In theory, it could also connect to third-party devices using the same as well as Zigbee, Wi-Fi, and Bluetooth; however, it cannot currently connect to other devices besides the First Alert Smoke and Carbon Monoxide Alarm. Like abode and Nest, Ring’s Base Station includes battery backup, an integrated siren (104db), and a cellular chip which you can activate by paying just $10 per month. Finally, while you can connect to the Base Station via Ethernet, it’s not required.
If you already own or are considering investing in any of Ring's security cameras or doorbells, the Ring Alarm will eventually tie all of your devices together in a seamless home security solution. For now though, if you want a DIY home security system that offers lots of add-on devices, including an indoor camera, the SimpliSafe Home Security System is your best bet and remains our Editors' Choice for DIY security systems. If you want a system that is big on home automation, check out the Abode Home Security Starter Kit, another Editors' Choice winner. As with the Ring Alarm system, it offers multiple wireless radios, but it already works with plenty of third-party devices, has its own IFTTT channel, and supports Alexa voice commands.
I installed the Spotlight Cam Wired at the front of my home, where there’s an outdoor outlet within the power cord’s 20-foot range. I put the Spotlight Cam Solar in the backyard, where there’s more unobstructed sunlight. Each camera comes with its own mounting tools, including a screwdriver, drill bit, mounting bracket and screw set with wall anchors.
Nest Cam IQ Outdoor will offer most of the same features as the indoor IQ (less the Google Assistant integration). The only difference between IQ and the original Nest Cam is the power cord. Unlike the original Nest Cam Outdoor, you will have to drill a hole to install the IP66-rated Nest Cam IQ Outdoor, unless you happen to have an existing opening. Nest Cam IQ Outdoor will start at $349. And this, my friends, is why I won’t be purchasing Nest Cam IQ. Not only is person detection sufficient and offered via the less expensive Nest Cam Outdoor, but I don’t have an existing opening, and I’m not going to drill. Plus, Nest Hello offers facial recognition and a pretty sweet Google Home integration.
My indoor Canary is self-sufficient, and that is exactly what I want in a home security camera. Flex has yet to provide that same experience. I’ve had to physically interact with the device multiple times to get it to reconnect to my internet. Also, the geofencing feature is inaccurate, often marking me away while home and vice versa. As for power loss notifications? They’re hit or miss.
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.
Ring is owned by Amazon, so we fully expected to be able to have our security system chatting it up with our Amazon Alexa and other smart home devices. But that’s not the case, at least not yet. We spoke to Mike Harris, Ring’s President of Ring Solutions, and he said that Ring wanted to focus on security first and foremost, as well as getting people comfortable with the system, before introducing integration with other products. But users can expect integration that already exists to be activated soon.
As part of the Ring Protect Plus plan priced at $10 per month or $100 per year, you'll get 24/7 professional monitoring on your Ring Alarm. When your sensors trip and the base station sounds an alarm, after 30 seconds it also sends a signal to Ring's central monitoring system. A support agent will attempt to call you to see if everything is okay, and then tries your emergency contacts if you can't be reached.
The keypad includes a reversible mount that can be attached to a wall as a bracket or flipped over and used as a tabletop stand at a slight incline. Ring includes a micro-USB cable and an adapter to power the keypad, but it also has an internal rechargeable battery that can last up to a year depending on your settings, so it's handy to be able to set it up wirelessly on a table or mounted to the wall, only recharging periodically as needed.
Welcome to the most versatile and rugged wireless Welcome to the most versatile and rugged wireless IP camera on the market. The Lorex Super HD Outdoor Wi-Fi Security Camera is the complete package. It is full of industry leading features such as 4MP (Megapixel) video resolution high powered infrared LEDs for 60 ft. night vision ultra-wide angle viewing ... More + Product Details Close
2) many users have not come up to speed on the functionality fo this system. thats not their fault.its really easy to set up quickly and with basic functioning, But the more you fool around/experimenter/learn about the system the more functionality it has. Ring really needs to come out with a comprehensive instruction manual and/or video-once you understand take keypad you will grasp it actually has more functionality and is easier to use than most legacy hard wired systems people are replacing.
At this point you have to verify your address if you choose to sign up for professional home monitoring, otherwise, just agree to the Terms of Service to continue. The next screen gives you the option of adding the included devices, all of which are pre-paired. I removed the battery tape from the contact sensor and it was added immediately. Here you can choose how the device will be used (door, window), give it a name, and assign it to a room (or choose No Room Assigned). I used the double-sided tape to install the sensor on a window, tested it, and moved on to the keypad.
The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
Press Continue and follow the video instructions to press the button at the top of the device, at which point the LED will begin flashing white. Press Continue again and go to your phones Wi-Fi settings to connect to the camera. Return to the app, select your home Wi-Fi from the list, and enter your password. Within seconds the camera will connect and you'll have the option to view a video tutorial that will walk you through the physical installation, or you can skip this step and use the written instructions. In the final step you'll be prompted to define Motion Zones, but you can come back to this later if you prefer.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.
Expand Security With Other Devices Nest Cam, Nest Protect, Nest Thermostat, Nest Secure, Nest Hello, Nest Cam IQ Ring Stick Up, Solar Panel, Chime, Chime Pro, Ring Floodlight Cam, Ring Spotlight Cam, Ring Protect, Video Doorbell, Ring Beams Canary, Canary View Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon)
Being a cautious optimist, I first followed the app instructions; this was a mistake. Unfortunately, the app instructions are incomplete and leave out important details. Next, I moved on to the included instruction manual where I learned that the first step of the installation process is to fully charge Spotlight’s battery. Unfortunately for me, it was too late for that. The app also skipped another essential step found in the instruction manual: mounting position.
Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
Thanks, Abe. I have a chart that compares Canary and Flex here: https://homealarmreport.com/canary-flex-security-camera-review/. I still prefer Canary All-in-One over Flex. Of course, it’s an indoor only camera so that might be a dealbreaker for you depending on how you want to use it. It has a better picture, already offers two-way audio (if you’re a Canary Member), has motion zones, and multiple air quality sensors.
One final issue has more to do with software performance than hardware issues, but it’s important to point out. From time-to-time, the snapshot will record a little too late. In the example above, it caught the UPS man’s back. For those without a Nest Aware subscription, this is all you get. Those with a subscription can rewind footage to see the moments before the clip.
Thanks!! One other question I have: my wife is due this fall and (in addition to a regular home security camera) I’m seeking a good baby video monitor, the best actually. Do you have a chart or column that compares and reviews baby video monitors? (I searched online and there’s an endless amount of options, and there’s also so many articles each one claiming this one is better or that one is better – but no one is nearly as good or trustworthy as you as far, and as far as breaking down each product and giving us the full truth and clarity there’s no equal to the job you have done! Do you have anything on this (baby video monitors)? If not yet, do you plan to? Thanks!
3) a brand with the best wifi connectivity record (I HATE when it loses connectivity), this is actually the most important thing to me – the wifi connectivity must be seamless, I’ve had terrible experience with bad wifi connectivity. I want to be able to pull out my phone anytime and instantly be able to see live video. zero tolerance for bad wifi connection:)
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
The Spotlight Cam captures video at 1080p and has a 140-degree field of view, but lacks the pre-buffered recording capabilities that you get with Netgear's Arlo Pro 2 camera and the Ring Video Doorbell Pro. It uses four infrared LEDS to provide up to 30 feet of night vision and has a built-in 110dB siren, an 802.11n Wi-Fi radio, and a speaker and microphone for two-way audio. The spotlight itself consists of two strips on either side of the camera, each with four LEDs that provide an overall brightness of 700 lumens with a 4,000K color temperature. The camera comes with one battery pack, a mounting bracket, wall screws and anchors, a screwdriver and drill bit, and a setup guide.
In terms of larger home integration, Nest is the very definition of a smart device. Its Works with Nest program automatically instructs connected products (such as smart lighting and thermostats) to perform their tasks without you having to tell them what to do. It’s an exceptionally hands-off solution, though you can still tweak it with custom preferences.
The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.
Hi Rose, I’m intrigued that you have a traditional alarm system but also one of these new wireless versions. Are they integrated? Can they be? I haven’t looked at the Ring, abode, and Nest systems because I have am old-fashioned standard system that came wired into my home. I’d love to integrate it with my Ring cameras and doorbell cam, or even get one of the new wireless voice-activated bases or keypads. Can that be done with any system today?
I’ve never tried to live stream continuously. I assume that’s possible, and if you hard wire, that shouldn’t be a problem, but what about bandwidth usage? If I wanted to stream continuously, I would probably look into a CCTV system. I’ve never tested one, but I’ve seen some in action. Of course, this would mean using a TV or monitor as your “monitor.” I know you want to keep the Echo Show, but I haven’t tried to do something like you are trying to do so I’m not sure what to suggest. I’m intrigued though.
From the app, you can control and manage your Nest Secure system. Of course, you can arm and disarm your system, but you can also see sensor status as well as sensor history. For example, you can see if your door is open or closed and you can see when it was last opened and last closed. You can also use the app’s Remind Me feature to remind you to arm your system if you forget to do so.
Other Devices Image Sensor, Smart Switch, Extra Siren, Temperature, Humidity & Light Sensor, Water Leak Sensor, iota Smart Doorbell, Range Extender, Smart Deadbolt Lock (Nest x Yale) Video Doorbell (Pro, Elite, 2), Spotlight Cam, Floodlight Cam, Stick Up Cam, Chime, Chime Pro, Solar Panel, Solar Sign, Ring Beams, Smoke & CO Listener, First Alert Smoke/CO Alarm, Flood and Freeze Sensor Satellite Siren, Smart Switch, Yard Sign
I’m leaning towards Arlo Pro 2 over the Arlo Q, due to the portability – however, since the portability is only a plus for me and not a must, is there any advantage that the Q has over the Pro 2 that I may want to consider before making my final decision. [I tried finding differences between the Arlo Q and Arlo Pro 2, and, aside from the design & portability, I was unable to find any.] If you know of any can you please share with me, and then I’ll be 100% certain in my decision:)
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
Regardless of which model you choose, it’s recommended you connect your Spotlight Cam to your Wi-Fi network before mounting it outside. (In the case of the non-wired Spotlight Cams, you’ll first need to charge the battery using the supplied micro-USB cable.) Once you add the camera to the Ring companion app, the camera’s voice prompts guide you through the connection process.