Do it yourself can be a really good option, but you need to make sure this is right for you before you jump in. There won’t be any technicians or professional installers to make sure everything is installed and working correctly. Ring does claim that the system is effortless to install but that obviously doesn’t guarantee that you won’t run into issues, especially if you don’t have experience with security systems. In this case, you just need to know yourself to know if this type of installation and maintenance is right for you. If you tend to hire out for most of your home projects, this extremely important project probably isn’t the one you want to start with trying on your own.
Device Theft Optional Wall Mount Optional Wall Mount Screwed in using proprietary screws, Ring will replace stolen devices. Depends on the Mount – Quick Mount easier to steal, Security Mount is a more permanent solution. Easier to steal. The power adapter twists off and the Nest Cam can be removed from the magnetic base by pulling. Secure Mount (Sold Separately)

You can set motion zones for the lights, too. In this case, the app shows a graphic representation off the motion sensor’s 270-degree range, and you can define where you want movement to turn on the lights by tapping up to three preset zones and then expanding or reducing coverage in those zones using a slider. Depending on your settings, the light will stay on for one to 15 minutes.


The Base Station keeps your Alarm system online and connected to your mobile devices. It connects to your home network via ethernet or wi-fi and links to all your Alarm components and select third-party devices via Z-Wave. Also included are a built-in 110-decibel siren, 24-hour backup battery and optional cellular backup (with a Ring Protect Plus subscription).

Many alarm systems integrate base station and keypad functionalities into a single unit, but Ring has made an interesting decision to separate the two, recognizing that these don't always need to be colocated. The base station serves best located centrally in the home in order to optimize wireless connections to all sensors and to centralize the alarm sound, while the keypad is likely to be placed close to the main point of entry for easy access.


After the hardware itself is set up, you can pretty much forget it's there, except for the keypad. You won't need to adjust the sensors regularly or clear alerts on them, everything you do from here on out is done via the app or keypad. It's worth noting that since the sensors aren't hardwired, you will need to change the battery at some point, though Ring says that the included batteries should last for up to three years with normal usage.
I would go beyond resolution and consider what you want the camera to do. My favorite outdoor camera is Arlo Pro, but a battery-powered outdoor camera will come with its own challenges. In my front yard, I need 24/7 continuous recording which is Nest, but I can’t deal with the way the giant wire looks on Nest Outdoor so I used Nest Cam Indoor filming through a window for a couple of years, which also has its own challenges, until I swapped out my Ring Doorbell for Nest Hello. Nest Hello is Nest’s video doorbell and it can record continuously.

If you just want an indoor and outdoor camera (not a doorbell), I would recommend Arlo Pro or Pro 2 outside and Arlo Pro/2 or Arlo Q inside. However, it would be best if you could place your Base Station in a central location. The Arlo cameras talk to the Base Station and the Base Station connects directly to your router (or Ethernet outlet or range extender).


When you arm or disarm the system, the keypad and the base station play a female voice that informs you of the system’s status (the keypad’s speaker is unfortunately subdued). LEDs on both devices provide visual feedback as well, although only the base station gives you a constant visual cue as to the system’s status: Blue for unarmed, red for armed.
Ring allows some of the best customization. As a result, it is very common for individuals to be able to pick and choose the features most important to them. You do not have to buy an entire package. Instead, check out this Ring product costs and price list. You can see the cost of each component of the Ring system, and you get to choose what works for your individual needs.
Other “Family” Devices Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon) Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro, Arlo Security Light, Arlo Audio Doorbell (coming soon) Stick Up Cam, Solar Panel, Ring Chime, Floodlight, Ring Doorbell, Ring Protect, Ring Beam Solar Panel, Ring Chime, Ring Doorbell, Floodlight, Spotlight, Ring Protect, Ring Beam Nest Cam, Nest Cam IQ, Nest Secure, Hello, Dropcam, Nest Thermostat, Nest Protect Canary, Canary View
The Ring Video Doorbell 2 and Ring Stick Up Cam provide easy and effective ways to set up a pretty strong security perimeter around the outside of your home, but it could be made considerably stronger with the addition of the now-Amazon-owned company’s Spotlight Cam. This outdoor camera/porch-light hybrid, illuminates the area and records video when its motion sensor is tripped.
I got my new Ring security system yesterday and installed the panel, door sensor, and motion sensor yesterday. I have had a security system with a major national monitoring company for nearly six years. I am not new to this. I got the new Ring system to replace the current system I have due to the price of the monitoring. I like the idea of having $10 a month for all of my cameras and security system combined. By switching, I am able to save $55 a month by cancelling my previous monitoring from the companies that did so for my security system and cameras.
There are many great brands out there that make it easy for you to find the security products that fit your unique needs. Two such options are the Ring and Nest systems. These popular brands have developed a range of products to help you easily build and customize your home security ecosystem. In order to help you choose the right system for you, we’ve broken down the pros and cons of each. Here’s a quick rundown of the main features you should keep in mind when deciding between the two:
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere.  Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
Although SimpliSafe's basic monitoring service goes for $14.99 per month for 24/7 monitoring, you have to pay an additional $10 more a month to control the system from your phone and to receive email and push notifications. Tack on another $4.99 per camera per month to record, download, and share video, and you're up to around $30 per month, which is three times what you'll pay for a Ring Protect Plus plan.

WINNER Nest. While Nest Aware is a more expensive service, advanced features like person detection combined with the ability for the camera to record 24/7 make it a better overall home security camera. However, Arlo with Arlo Smart is also a contender as the service is less expensive and the camera includes free storage. You can also add continuous video recording to Arlo Pro 2, but only if using the camera plugged-in indoors. You can compare Arlo and Nest’s CVR plans here. Ring will also soon add continuous recording, but only if you have a wired Ring camera.
Contact sensors come in two pieces, a large sensor part and a smaller magnet part, and both pieces must be aligned within 1/4 inch of each other when the door or window is closed. One piece goes on the door or window while the second part goes on the frame, but it doesn't matter which part goes on which side. When the door or window is opened, the two parts are separated, and the sensor triggers. 

Ring Chime Pro: For $49, you get a Wi-Fi extender and an indoor chime that lets you know when you have Ring notifications. This accessory is particularly useful if you have a lot of Ring devices in a larger home, as it helps you eliminate Wi-Fi dead spots that could prevent important notifications. You can change the alert tone, adjust the volume and put it on a Do Not Disturb mode. If you just want the chime capability without a Wi-Fi extender, the Ring Chime is $29.
Motion detection was responsive and accurate with the default settings, which placed the sensitivity midway on a scale between “people only” and “all motion.” You can adjust this to your liking with the slider, or use it in combination with customizable motion zones.  With each alert, Chime Pro simultaneously emitted a digital Ring. This ensured I was kept aware of detected activity even when I was home, as I don’t usually carry my phone around the house. You can change the chime’s sound and volume and “snooze” it for periods of time in the Ring app.

After testing indoor Nest IQ Indoor and Nest Cam Outdoor, I’ve decided to pass on Nest IQ Outdoor. Plus, it sounds like this version will require drilling, and I’ve found that Nest’s facial recognition feature doesn’t add more value than their face detection feature. I also don’t have a place for Ring Floodlight. However, I will buy Ring Spotlight. I have six devices in my office waiting to test, so I can’t promise that it’s going to happen quickly, but it will happen! 🙂


Installing the Ring Alarm system is easy thanks to the well-written getting started guide. I already had a Ring account, but if this is your first ring device, start by downloading the Ring app and creating one. I opened the app and tapped Add a Ring Product, selected Alarm from the list, and confirmed my location. I plugged in the base station and pressed the pairing button, which started the blue LEDs spinning, indicating that the station was in pairing mode. I tapped Find My Base Station in the app and selected Wi-Fi as my internet connection method (you can connect via Ethernet or Wi-Fi), selected my router's SSID, and entered my Wi-Fi password. The LEDs flashed white momentarily before turning solid blue and the Wi-Fi indicator turned green, indicating a successful pairing. The app also confirmed the connection.
Person Detection was the first feature launched under the Canary Vision project, a project that aims to add AI-powered intelligence to Canary devices. The second Canary Vision feature is Package Detection, which lets users set up notifications for when packages are delivered to their homes. This feature is exclusive to Canary Flex, and it can only be accessed if you have a Canary Membership.

Both systems offer exceptional protection and support, so the choice really comes down to your unique needs. For someone who wants their home to be fully automated and for their devices to talk to one another, Nest is the easy choice. While more expensive, the system offers excellent connectivity and added products like the Nest Tags and connected lock.


I have tested Reolink Argus and Argus 2. Both are indoor/outdoor, hubless, battery-powered cameras. The cameras do not offer cloud storage. Instead, you can purchase and add an SD card. The cameras record in FHD 1080p, offer night vision, live streaming, mobile app access, and a 130° field of view. However, they lack other features offered by Canary, Arlo, and Nest including geofencing and the ability to connect to third-party devices.

As of this writing, there are only a handful of add-on devices available that will work with the system, and for now, it doesn't support integrations with other Ring devices or third-party Z-Wave and Zigbee devices. That said, integration with Ring doorbells and cameras is on the way, and interoperability with third-party devices is also in the works.
Hi Rose, I’m intrigued that you have a traditional alarm system but also one of these new wireless versions. Are they integrated? Can they be? I haven’t looked at the Ring, abode, and Nest systems because I have am old-fashioned standard system that came wired into my home. I’d love to integrate it with my Ring cameras and doorbell cam, or even get one of the new wireless voice-activated bases or keypads. Can that be done with any system today?

For free, you have access to Basic which includes 7 days of free cloud recordings (up to 1GB), supports up to 5 cameras, and 3 months of phone support. Premier is $9.99 per month or $99.00 per year. It includes Arlo Smart, e911, 30 days of cloud recordings (up to 10GB), support for up to 10 cameras, and provides unlimited phone support. Finally, Elite is $14.99 per month or $149.00 per year and includes 60 days of cloud recordings (up to 100GB), support for 15 cameras, and unlimited support.
I haven’t had that problem, and as you said, I’m running it hardwired. My clips include a front facing image of guests. That said, I’ve recently had issues with wake up times when I’m away from home. As an example, I answered a ring alert yesterday, but it just kept spinning. I had to hard close the app, open it back up, and then check the alert. By then, the guest was gone.
After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.
Hey Scott, sorry about your car. Under shortcuts, you will find the video reviews. For Nest, night vision is shared at minute 1:43 and keep playing for just a moment to see night vision from Ring. During the Arlo vs. Canary video (the third video shown), skip to minute :54 to see night vision from Canary and keep playing to see a side by side comparing it to Arlo. To me, they are all about the same. I’ve found that the best night vision comes when you leave the lights on. I actually have automated lights on my porch, and they turn on at sunset and back off at sunrise. Integrating the cameras with a smart home system: I’ve tested Arlo Pro with SmartThings, I wasn’t a fan of that. It actually changes the mode to a new mode called SmartThings. I prefer geofencing mode. Ring I’ve tested using IFTTT, but I haven’t tested it with SmartThings.
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.

Jamie Siminoff, Chief Inventor and Founder of Ring, said: “We’re excited to continue expanding the Ring of Security with Ring’s first indoor/outdoor cameras. Ring Stick Up Cams give neighbors maximum flexibility to position the cameras anywhere, regardless of power availability, to secure every corner of their property. Every decision Ring makes is driven by our mission to reduce crime in neighborhoods; it’s important to have multiple layers of home security, and the Stick Up Cam line offers affordable, easy-to-install security for both inside and outside of the home.”
You can also mount the base station on a wall, and can connect to your wifi network, or you can connect directly to your router with a network cable. The Ring Alarm base station offers a 24-hour battery backup, plus it can connect to LTE if you have an outage, so you have a cellular option if needed; however, you do have to pay for it with a monthly subscription.

The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.

If you have a dog or a cat, getting a home alarm that won’t be constantly triggered by Fido or Fifi’s movements is a real question you have to consider. The Ring Alarm claims that it won’t detect pets weighing under 50 pounds if the alarm is mounted above seven feet, while pet-friendly motion detection is already integrated into the Nest base station and door sensors.
The Spotlight Cam comes with 30-day free trial of Ring’s cloud storage for recorded video. At the end of the period, you have the option of upgrading to one of a pair of Ring Protect plans: Protect Basic allows you to store, review, and share video for up to 60 days for $3 per month or $30 a year per camera. Protect Plus provides the same for unlimited Ring cameras—including the Ring Video Doorbell—and adds a lifetime warranty and discounts on Ring products for $10 per month or $100 a year.
×