If you think about it, all of these cameras are magnetic meaning that anyone can steal them or knock them offline. The only way to stop this is to mount the camera high enough that an average person cannot reach them. In doing this, it means the battery cameras require you to get out a tall ladder to replace or recharge the battery where with the nest, once you run the power cord and its plugged in, you for a lack of a better phrase, “you set it and forget it.”
“Where we’re going with it is once we know this, we can then do things in our network which include, you know if someone’s walking around your house at 3 AM in the morning and your house is on stay mode, then we can do a different type of alert or sort of raise the alert level on that camera,” explained Siminoff. “And then we do things like deliver presence saying ‘How can I help you, what are you doing?’ and so really taking that presence and that interactivity, and that pre-crime thing that Ring is so good at and take it to the next level by knowing the status.”

The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
The decision to separate the system’s brains—the base station—from the keypad is smart: It allows you to place the larger base station somewhere out of the way and put the smaller keypad near an entry door, where it’s easy to access. You can also deploy more than one keypad—one at the front door, one at the back, and one on your bedside table, for instance. Putting the base station somewhere other than near an entry door also enhances the system’s overall security: If burglars can’t find it quickly, they can’t disable the system.
I’m leaning towards Arlo Pro 2 over the Arlo Q, due to the portability – however, since the portability is only a plus for me and not a must, is there any advantage that the Q has over the Pro 2 that I may want to consider before making my final decision. [I tried finding differences between the Arlo Q and Arlo Pro 2, and, aside from the design & portability, I was unable to find any.] If you know of any can you please share with me, and then I’ll be 100% certain in my decision:)
I’ve heard others say Arlo is the perfect outdoor camera. I disagree. The original Wire-Free camera had more latency than Arlo Pro. Also, Pro includes a wider field of view, a rechargeable battery, a siren (built into the hub), and it adds sound with two-way audio, all features the original Arlo lacked. Arlo Pro 2 bumps up the resolution to 1080p and adds three features if the camera is plugged-in: CVR, Motion Zones, and Look Back.
Tap the three-bar icon in the upper left corner of the Dashboard to access the Alarm settings where you can enable/disable email and push notifications, change your location, enable/disable specific sensors while in Home and Away mode, change the Entry and Exit delay timers (30 to 180 seconds), and allow additional users to control the Alarm and other Ring devices.

For the Ring Alarm to function properly, you'll need to subscribe to Ring's Protect Plus plan, which is $10 a month or $100 if you prepay for the year. It includes 24/7 professional monitoring, video recording, reviewing, and sharing for unlimited cameras, 10% off purchases made at Ring.com, and an extended warranty on all of your items as long as your subscribed.

“Where we’re going with it is once we know this, we can then do things in our network which include, you know if someone’s walking around your house at 3 AM in the morning and your house is on stay mode, then we can do a different type of alert or sort of raise the alert level on that camera,” explained Siminoff. “And then we do things like deliver presence saying ‘How can I help you, what are you doing?’ and so really taking that presence and that interactivity, and that pre-crime thing that Ring is so good at and take it to the next level by knowing the status.”


Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
There is a problem with the Alexa skill if it requires the user to say “(whispers) Alexa, show me the front door” when someone is at the front door. As is, without Alexa – people already try to hide, turn the lights off, etc. – lol. “ALEXA!!! SHOW ME WHO IS AT THE FRONT DOOR. OH THAT PERSON I DO NOT WANT TO OPEN IT, I DO NOT LIKE THAT PERSON THEY ARE NOT HOLDING PIZZA! SO I WILL NOT OPEN IT. I HOPE THEY DID NOT HEAR ME.”
FAST FREE USPS PRIORITY SHIPPING WITH TRACKING INCLUDED. SAME DAY PROCESSING IF PAID BY 5PM EASTERN TIME ZONE MONDAY THRU FRIDAY EXCLUDING HOLIDAYS. Up for sale a Used Ring Stick Up Cam Wire Free Outdoor Security Camera. The device works perfectly, but has some marks on exterior as seen in picture. This kit comes with new never used mounting hardware as well as seen in pictures.
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
I actually bought mine from Home Depot. So Ring has some work to do with this product as it was put out into the market too early with some engineering issues. First off I will say that during the DAY the camera works just as good as the ring doorbell. I get consistent motion alerts in the Daytime in the zones I set up with the camera. However during the night its a different story. I set up the camera on the soffit of my garage which is 8 feet from the ground. Ring specifically says that you CAN mount on the soft (under the roof line) of a house, however when mounting the camera the installation instructions say that the sensor under the camera (the big globe white thing) must be parallel to the ground. Unfortunately Ring poorly engineered the camera where the vertical axis of the arm for the camera would not allow me to adjust the camera angle any higher so that the sensor would be horizontal to the ground. Due to this the camera and floodlights will not sense me during the night until your 5-8 feet away from the thing which is totally counter productive to what I bought the whole camera floodlight combo for. I am still currently working with Ring customer support on this but it might end up with me making another hole in my garage to mount it on the side but I do not want to do this until I get a firm answer from Ring that this will work. As far as connectivity and video quality I have no issues. But to sum this review up DO NOT BUY IF YOUR MOUNTING TO A SOFFIT 8 FOOT OR LOWER. I will update my review when necessary.
×