Ring also sells several cameras including the Ring Video Doorbell, the Video Doorbell 2, Ring Elite, and Video Doorbell Pro. They also sell a Floodlight Cam, Spotlight Cam, and two versions of their Stick Up Cam. Most of the cameras are geared toward outdoor use with the exception of Stick Up Cam Wired and Stick Up Cam Battery. The two cameras can be used indoors or outdoors.
Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
During my extensive research for a cost-effective security solution in 2017 I compared various offerings from different vendors. The Ring was one of the 3 that made my list.Once Ring ceased sales because of a lawsuit, I decided to wait instead of deciding on the other 2 home security solutions because Ring was the cheaper of the 3. I waited and pre-ordered soon as I got the long awaited email and I'm glad I did because it is worth it! The setup up was simple and I was up and running within minutes. Placing the sensors is key and the provided adhesives make the installation quick, if you do not want to use the mounting screws. The modes are helpful (Unarmed, Home and Away). Even if your system is on the 'Unarmed' mode, you still continue to receive alerts in the Ring App on activity from the Motion and Door/Window Sensors. I added an extra range extender which was very easy to add and took less than a minute to be adopted into my system. The range of the devices quiet well, I'm getting coverage for a 1200 square foot area just without the extender. The sensors light up when it senses activity and a ping is heard on the base station. You can adjust the volume for the base station so it is not too loud. Highly recommend this because it is user-friendly, and the sensors work great. Ring support is always there to assist if you need help.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
Well, not long after the training mode came to an end, I made a bonehead mistake. I forgot to get my girlfriend set up with the App and when she came over when I wasn’t home, the alarm went off. Unfortunately, I was not able to cancel her mistake due to me fumbling with a rather clunky app interface on my phone. Luckily the Ring representative from the monitoring team called very quickly and I was able to avoid a cop showing up and a possible charge$$. My interaction with the Ring rep was fantastic. They called very quickly and the person I spoke with was extremely professional, kind and knowledgeable! They made me feel like a valued customer for sure.
If it's an entry sensor you're installing, Ring will ask what kind of door it is to apply the right sort of security to it — if it's your front door, for instance, it will use an entry countdown when you open the door while the base station is in Home and armed mode.  If it’s the back door that's opened in this mode, the alarm will sound immediately.
Arlo Pro can be used outdoors only if running on battery or solar power. (While they once sold an outdoor power adapter, it is no longer available due to quality issues.) If you’re using battery power, you will have to charge your camera indoors as the included power adapter is not rated for outdoor use. Furthermore, if your battery is too cold from being outside, you might have to wait for it to warm up before you can begin to charge it. If you don’t like the sound of that, you can invest in the $59.99 Pro Charging Station and an additional rechargeable battery ($49.99). You can use the charging station to charge two batteries simultaneously so that you always have one ready to go when needed. You can also purchase the Arlo Pro UV-resistant silicone skins, which provide added protection against condensation and sun glare.

The Nest Secure and Ring Alarm each clearly have their advantages. The Nest comes out ahead in certain factors, most notably its Works with Nest program that provides easy integration with the broader smart home. But the price point of the Ring system is far more attractive, particularly for those who are just starting to build their smart home. If your priority is smart home integration, Nest may be the better option. But if a more affordable base price — and more components included in that base price — is what you’re after, you can’t beat the Ring.
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.
The white base station is the brains of the system. It measures 1.4 by 6.6 by 6.6 inches (HWD) and has a 1.5-inch LED ring and a speaker on top, and a USB port and a LAN port around back, joined by a pairing button, a reset button, and Wi-Fi and power indicators. The base contains circuitry that supports numerous wireless protocols including dual-band 802.11n Wi-Fi, Z-Wave, Zigbee, Bluetooth 4.1, and LTE cellular as a backup if you subscribe to the Ring Protect Plus plan (more on this later). It also has an internal backup battery that will provide up to 24 hours of power in the event of a power loss, and a loud 105dB internal siren.
In home mode, the default setup is for motion sensors to be ignored while door/window sensors will trigger the alarm to activate. This mode is obviously intended for when you're moving around inside your home but want to be protected if someone enters the house through a monitored door or window. Finally, away mode arms all sensors so that any opened monitored door or window or movement within the house will set off the alarm.
Thanks!! One other question I have: my wife is due this fall and (in addition to a regular home security camera) I’m seeking a good baby video monitor, the best actually. Do you have a chart or column that compares and reviews baby video monitors? (I searched online and there’s an endless amount of options, and there’s also so many articles each one claiming this one is better or that one is better – but no one is nearly as good or trustworthy as you as far, and as far as breaking down each product and giving us the full truth and clarity there’s no equal to the job you have done! Do you have anything on this (baby video monitors)? If not yet, do you plan to? Thanks!
Two days later we had the Ring alarm and a Ring doorbell in hand. The whole setup took less than 20 minutes (including the doorbell). Plug in the parts, stick sensors to doors, use the app to walk through configuring them, and you're done. A few minutes later I had the professional monitoring set up. I spent a few minutes familiarizing myself with the features, adjusting alarm volume, adding user codes, etc. It was all just so seamless.
By purchasing this system you’re almost certain that they will come out with upgrades and updates to this product and ways to integrate it with Alexa and smart home devices. If you encounter any kind of issues, they will have someone listen to you and actually give you a solution rather than one of these knock off Chinese products that will give you excuses for faulty behavior but not solutions.
A Ring home security system can get pricey, as you need to pay upfront for the devices. The plans are straightforward, so you won’t run into any confusion there. The low monthly cost of the plans makes the premium features accessible for any budget, especially if you only have one or two Ring devices. The real question is whether Ring offers enough value compared to the other systems on the market. If you’re willing to take a more DIY approach with installation and you don’t mind a lack of home automation features, then the Ring is a contender.
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
2. I tried to use it to find footage of an event, and it was incredibly difficult. The Wyze Cam history tab uses a generic photo for all alert events. You can’t even see a photo of the event without clicking in. When I use a camera indoors, the ease of finding video evidence is less of an issue, but when you’re trying to pinpoint something that occurred outside, you usually have a longer time frame to sort through. For example, we had someone spray paint the curbs in our neighborhood overnight which means I had to look through several hours worth of footage. It was annoying, and all of the footage was irrelevant so it was time wasted.
The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.
Enjoy superior image quality courtesy of the 4MP Enjoy superior image quality courtesy of the 4MP sensor delivering twice the resolution of 1080p for stunning clarity. Wide Dynamic Range enriches your image quality with deep blacks contrasted whites and vivid colors so images appear true to life. Infrared LED's give you up to 100 ft. of night vision ...  More + Product Details Close
Ring’s smart home security system does not include carbon monoxide monitoring. If you want to add this feature to your home, you can purchase either Ring’s Alarm Smoke and CO listener or First Alert’s Z-Wave Smoke/CO alarm. These are installed next to your current smoke alarms and will hear when either go off which triggers your security system and lets you know there is an emergency at home.
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
Regardless of whether you go the adhesive or hardware route, Ring provides everything you need right in the box, with installation kits for each component of the system conveniently boxed and labeled to make it easy to find what you need. All you'll need if you want to use the included screws and anchors for hardware mounting are a screwdriver and a drill. 

Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.
×