Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.


Would it be better than 1080p? Yes. Would it be good enough? I don’t know. I only tested the indoor IQ, not the outdoor. I didn’t think Supersight was that fabulous. Here’s a link to a section of my video that shows the Supersight in action (https://youtu.be/BIWchrX27fU?t=2m28s and also here https://youtu.be/BIWchrX27fU?t=56s). On the white table that’s on the right side of the frame, there are a few books stacked up. You can’t even read the titles on the bindings, but maybe a license plate would be different?
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.

Ring doesn’t have any contracts or other subscription-related requirements, but you do have the option of adding one of the video recording packages mentioned above. However, they do offer exclusive discounts and an extended warranty if you choose to purchase the upper tier package. Ring’s equipment comes with a one-year warranty, and if your doorbell is stolen, Ring will replace it for free.
Ring suggests that the motion detector should be placed in a location with a good view of a high-traffic area likely to be passed by any intruders, with the detector placed about seven feet off the floor. Motion detection sensitivity can be adjusted in the app if you find you're getting too many false alerts such as from a pet. The detector can be mounted using either adhesive or included screws that attach a bracket to the wall for easy removal of the detector itself. 

Mair, I installed the Spotlight Cam and have been running it for a few days. I updated the content above, and I’m working on a separate review (which I will publish after Thanksgiving). So far it’s fine. There are some limitations with the Solar version, which is the same as the Battery version. One, you can’t create Activity Zones, that is limited to the Wired version only. Two, you can’t schedule the lights. The lights will turn on when motion is detected and you can trigger them manually, but that’s it. I’d say that the motion detector performance is on par with the Ring Video Doorbell. It includes the same feature that allows you to adjust motion sensitivity. There is no way to weed out false alarms, and sometimes I get alerts if the wind blows too hard. The camera wakes up fast, faster than my doorbell. The video quality is just okay. It doesn’t look like 1080p to me, it looks like 720p. Two-way talk works well. I was surprised that the cameras don’t play together. For example, if my doorbell detects an alert, I can’t trigger Spotlight to record. Spotlight doesn’t work with IFTTT so it’s not possible through their service, and though it works with Stringify, you can’t create this sort of relationship between cameras using Stringify. What else do you want to know?
Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."
I agree! This was a great comparison article for me and timely. A neighbor of ours just recently got robbed and led us to upgrade our basic home security features. I am curious if this article will be updated once Abode Iota is launched. I like the al a carte of monitoring with Abode and may end up getting nest outdoor camera with Abode. Thank you again!
We put these products side by side to give you a comparison of what each one offers, along with a rundown of their similarities and differences. Read on for Ring Alarm vs. Nest Secure: an in-depth look at two of the best home alarm systems on the market. And for a close look at each system one by one, be sure to check out our full review of the Ring Alarm, as well as our full review of the Nest Secure.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
When we tested out the accuracy of the motion and contact sensors, we were impressed with how quickly our app registered movement. Opening the door meant that our app automatically showed the “faulted” icon indicating movement – in fact, it was almost instantaneous. Same for the motion detection sensor – the notification on both the hub and the app appeared almost immediately. This was the case whether we were in the house or not. With some devices we’ve tested, particularly with security cameras, there’s often a lapse with notifications. It doesn’t appear to be the case here.
First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.
I’m trying to set my mom up with a constant live feed of their front door. I bought a cloud cam and echo show, before realizing their house isn’t set up to get much of a front door view from the inside. Think a hard wired ring pro with echo show always displaying the live feed would work, or drain the rings battery even though it’s hard wired? Any other ideas? I’d like to keep the echo show, but will probably return the cloud cam.

During my extensive research for a cost-effective security solution in 2017 I compared various offerings from different vendors. The Ring was one of the 3 that made my list.Once Ring ceased sales because of a lawsuit, I decided to wait instead of deciding on the other 2 home security solutions because Ring was the cheaper of the 3. I waited and pre-ordered soon as I got the long awaited email and I'm glad I did because it is worth it! The setup up was simple and I was up and running within minutes. Placing the sensors is key and the provided adhesives make the installation quick, if you do not want to use the mounting screws. The modes are helpful (Unarmed, Home and Away). Even if your system is on the 'Unarmed' mode, you still continue to receive alerts in the Ring App on activity from the Motion and Door/Window Sensors. I added an extra range extender which was very easy to add and took less than a minute to be adopted into my system. The range of the devices quiet well, I'm getting coverage for a 1200 square foot area just without the extender. The sensors light up when it senses activity and a ping is heard on the base station. You can adjust the volume for the base station so it is not too loud. Highly recommend this because it is user-friendly, and the sensors work great. Ring support is always there to assist if you need help.

At 3.2 by 0.9 by 0.9 inches (HWD), the Z-Wave contact sensors for doors and windows are bulkier than the sensors that come with the Vivint Smart Home system (2.5 by 1.0 by 0.5 inches). They're each powered by a CR123 battery that is rated to last three years and can be installed using double-sided tape or with mounting screws. The motion sensor (3.5 by 2.4 by 1.7 inches) also runs on a CR123 battery and uses a Z-Wave radio to communicate with the base station. The range extender (3.1 by 1.8 by 1.1 inches) plugs into a wall outlet and extends the Z-Wave signal by up to 250 feet, so you can place sensors just about anywhere.
The Ring app will automatically detect the rest of the items that came pre-packaged with the base station once its initial set up is complete. You'll need to pull plastic tabs on each piece so that they can power up, and you'll want to do this one at a time. If you pull all the tabs at the same time, the system tries to connect to multiple devices at once and slows down the setup process.
The Ring Alarm system comes with a base station, a keypad, an entry sensor, a motion sensor, and a Z-Wave range extender. Also included in the box are installation kits containing mounting tape and hardware for the keypad and the two sensors, an AC adapter for the base station, a USB power adapter and cable for the keypad, a getting started guide, and an alarm kit security basics guide.
This is probably the best part about this alarm, that there is no need for a desktop PC to reach any advanced features and that you can configure it from anywhere. From arming the alarm from work (if you forgot to arm it before leaving), to disarming remotely if needed. App is extremely user friendly and very intuitive, so this is probably the best part. Very well organized and all Ring devices can be controlled from within the same app.
“Where we’re going with it is once we know this, we can then do things in our network which include, you know if someone’s walking around your house at 3 AM in the morning and your house is on stay mode, then we can do a different type of alert or sort of raise the alert level on that camera,” explained Siminoff. “And then we do things like deliver presence saying ‘How can I help you, what are you doing?’ and so really taking that presence and that interactivity, and that pre-crime thing that Ring is so good at and take it to the next level by knowing the status.”
Friend access allows users to view live streams, view recorded clips, and favorite clips. If you want to share more, grant access rights. In addition to the rights already discussed, those with access rights will be able to record video footage, mute the speaker, enter full-screen view, zoom and drag video footage, access and change modes, manually record, take snapshots, favorite, and share or delete video footage. Finally, Arlo does allow you to control which camera or cameras other users can access. For example, you can give them access to your outdoor camera, but not your indoor camera.

The Ring Security System can be a great option, there are just some things you need to keep in mind before you jump in and purchase the system. Instead of chancing it on a company that is just getting started in the home security business, why not go with a company that is absolutely committed to protecting homes and families and has been for many years. Protect America has a proven track record as the 14th largest residential home security company and a Nine-Time Consumers Digest Best Buy Winner. If you’re looking for a tried and tested home security system, contact Protect America for a free quote today.
If you can live without the spotlight feature, consider our Editors' Choice for outdoor security cameras, the Netgear Arlo Pro 2. It costs more, but it delivers pre-buffered recording so you can see what happened just before a triggered event. It also comes with free and subscription-based cloud storage and offers continuous recording capabilities.
Ring offers access to a timeline-style feature where you can view events going back six months (if you are subscribed). From the timeline, you can sort through ring events, motion events, starred events, or live view events. From the web app, you can also sort by device so that you can separate your Spotlight Cam footage from footage captured by your other devices. Right now, the feature isn’t very advanced. Soon, Ring plans to completely revamp their mobile app.
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.

In addition to sharing camera access, having multiple users will make geofencing even more intelligent. The cameras will arm when everyone is away and disarm when at least one person is home. You can also see who is home and who is away using the mobile app and set up Presence notifications to alert you of the same. Finally, it brings everyone in on the action. If an event is detected, an alert will be sent to all users. If one user responds to the alert, other users will be able to see how that person responded. You can also leave a comment on the event and chat with other users directly within the app.


Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Third, Nest Guard has a voice. Of course, it’s no Google Home, but it will provide useful information. For example, when you arm your system, there is an arm delay which allows you to exit your home without setting off the alarm. Instead of an annoying beep that continues until the system arms, Nest Guard uses a friendly voice to tell you how much time you have left.
Third, Nest Guard has a voice. Of course, it’s no Google Home, but it will provide useful information. For example, when you arm your system, there is an arm delay which allows you to exit your home without setting off the alarm. Instead of an annoying beep that continues until the system arms, Nest Guard uses a friendly voice to tell you how much time you have left.

Great article with lots of useful information. Very comprehensive comparison that really helps people make a wise decision based on their particular needs. FYI, I chose abode for my home security needs because it’s a proven shipping product and it integrates well with other systems. Although the camera quality might not be as good as others, it will suffice for my needs.
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward.  I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
Well, I have not had any problems. This product works as advertised. Video freezes up occasionally but recovers quickly. I did move my router inside the house and went from -61 to -48. Camera resolution is acceptable and the IR emitters work well up to about 20 feet at night. Customer service is good (at least the one time I called them). I recommend this product. ADT installed our system and stand behind their work.
If you already have a Ring doorbell or security camera, the integration is quite seamless, and the value becomes even better on the annual costs. Ring charges $30 a year per camera on the regular subscription, so if you've been holding out on adding to your system, this may push you over the edge. The company has plans to offer additional sensors in the future, like smoke and CO sensors, water sensors, and more, which will only help make it even more robust.

After I finished installing this device I found myself having issues with it for the first 3 days where sensors will go offline for no reason almost every day; suddenly after day 4 maybe, all of the issues disappeared and the system was now working like a well-oiled machine. I reached out to Ring support team and they informed me that there was an automatic update that the brain device was going to perform on its own and that would solve all of the issues I was experiencing. They were indeed 100% correct, after just a few days the system was doing exactly what it was supposed to be doing all along. No issues, no dropped devices, a happy customer here now. If you end up choosing this system and experience issues during the first 3-4 days, please wait a few days for your system to automatically update itself to the latest software and you’ll see the issues magically go away.
As part of the Ring Protect Plus plan priced at $10 per month or $100 per year, you'll get 24/7 professional monitoring on your Ring Alarm. When your sensors trip and the base station sounds an alarm, after 30 seconds it also sends a signal to Ring's central monitoring system. A support agent will attempt to call you to see if everything is okay, and then tries your emergency contacts if you can't be reached.
I had a question as I am looking for a camera system to use for my outdoors. I have blink for inside and am plenty happy with it, but want something better for outside. I really wanted to go with Ring, but was disappointed with the integration available. Then I looked closer and from what I understand there is no way to turn off recording. Is that correct? That is fine maybe for the front of my house, but who is going to want a system in their home or in their backyard that they can not stop recording. This leads into serious issues about privacy to me.
Swann Smart Security Camera is an indoor/outdoor battery powered security camera that works without a base station. It’s most similar to Reolink Argus and Canary Flex. The camera records in 1080p FHD, offers a 120° field of view, night vision, and is IP65 rated for outdoor use. Unfortunately, it doesn’t work with any third-party devices and it lacks intelligent features to reduce false alarms. The camera boasts a feature called True Detect™, but that’s just a fancy marketing term for PIR motion sensor. The camera’s best feature is free local and cloud storage. From the app, you can playback seven days worth footage stored locally. The camera also includes two days of cloud storage.

Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
For a long time, I used my indoor Nest Cam to film through my window. It was a makeshift outdoor camera supplemented by my Ring Video Doorbell. So it should come as no surprise that when Nest Cam Outdoor launched, I jumped at the opportunity to buy it. Since then, my search for an outdoor solution has continued to Canary Flex, Ring Spotlight Cam, Arlo Pro, Arlo Pro 2, Blink XT, Nest Hello, Reolink Argus, Argus 2, and a few that did not make the honorable mention list.
Ring Chime Pro: For $49, you get a Wi-Fi extender and an indoor chime that lets you know when you have Ring notifications. This accessory is particularly useful if you have a lot of Ring devices in a larger home, as it helps you eliminate Wi-Fi dead spots that could prevent important notifications. You can change the alert tone, adjust the volume and put it on a Do Not Disturb mode. If you just want the chime capability without a Wi-Fi extender, the Ring Chime is $29.
Rose first let me say thanks for the reviews. But just wanted to let you know (and maybe the nest guy you talked with also) that you can choose to only get notifications for people and not motion. This has been available for at least 3 months now. Also have only had one time when it had reported a person and was not. Car lights was what it really saw.

Hey- just happen to be reading this, and full disclosure I’m one of the canary founders. Our battery is designed to sub – temperatures and i had mine sitting under snow and it still worked (though video was white as it was… well… under the snow). We say it goes to -4 degrees F (-20C). But yea, the battery won’t last as long in that cold, but you can keep it plugged in, or just charge it overnight to get it back up and running. Cheers, Adam


Standalone accessories can be added to your setup in a similar manner to those included in the base kit, although you'll have to scan a QR code on the back of them using the Ring app in order to get them to appear. From there, it's the same process of choosing the sensor type, naming it, assigning it to a room, and testing to make sure it's registering properly.

The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
We've begun having an ongoing problem with car break-ins in our neighborhood. I wanted to get a security cam to monitor our driveway. I looked into standard cctv and more advanced poe/hd cams with a dedicated computer and HDD, but hesitated due to the complicated nature of the installs. Not that I can't do that, but I really wanted a simpler option. Enter the Ring Floodlight Cam. I purchased one to install in place of the motion floodlight over our driveway. I am pleased.
×