Second, you can take it to the next level with Ring Locations. The Locations feature lets you assign your different devices to different locations under one account. You can then decide who has access to each location. For example, this could theoretically solve the challenge I described above. If I had a camera at my grandmother’s, I could give access to my family, but exclude them from viewing footage from cameras located at my home. When the new app launches, you will also be able to view location-based grouping backed by a multi-camera view.
One final issue has more to do with software performance than hardware issues, but it’s important to point out. From time-to-time, the snapshot will record a little too late. In the example above, it caught the UPS man’s back. For those without a Nest Aware subscription, this is all you get. Those with a subscription can rewind footage to see the moments before the clip.

Thanks Rose for this update! Not familiar with Kuna and will check them out via your link. Have been continuing to research the best outdoor option. Surprised that none of the major brands in your side-by-side can be used in colder regions – seems like that eliminates a lot of potential customers. Glad I found your review and keep up the great work in this space – very helpful!
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
If you opt for the rechargeable battery, you have to either disable the device every time it needs a charge or buy an extra battery. The battery is also a pain in the you-know-what to get out. Ring uses special screws that require a specific screwdriver head to remove. It comes in the package with the camera, but even so, you have to track down that one specific screwdriver every time you need to remove the cam.
“Where we’re going with it is once we know this, we can then do things in our network which include, you know if someone’s walking around your house at 3 AM in the morning and your house is on stay mode, then we can do a different type of alert or sort of raise the alert level on that camera,” explained Siminoff. “And then we do things like deliver presence saying ‘How can I help you, what are you doing?’ and so really taking that presence and that interactivity, and that pre-crime thing that Ring is so good at and take it to the next level by knowing the status.”

After receiving Arlo Pro 2, I completed a second battery test in a lower traffic environment. With the same settings, I ran Arlo Pro and Pro 2 side-by-side to see if Pro 2, with its higher resolution, drained the battery faster. It did not. In fact, it held a slightly better charge than Arlo Pro. Of course, I’m assuming this has more to do with the fact that the camera’s battery is newer and less to do with the fact that it’s a different camera. During the second test, both cameras lasted 5 months on a single charge, and it took 2 hours and 30 minutes to recharge the batteries.

Download the Ring app (available for both iOS and Android) and connect the Alarm with your existing Ring devices, or, if this is your first Ring product, follow the instructions and advice on how to get started. Both the app and written materials in the box provides helpful suggestions on how and where to set up your motion sensors and contact sensors.


If you opt for the rechargeable battery, you have to either disable the device every time it needs a charge or buy an extra battery. The battery is also a pain in the you-know-what to get out. Ring uses special screws that require a specific screwdriver head to remove. It comes in the package with the camera, but even so, you have to track down that one specific screwdriver every time you need to remove the cam.
If it's an entry sensor you're installing, Ring will ask what kind of door it is to apply the right sort of security to it — if it's your front door, for instance, it will use an entry countdown when you open the door while the base station is in Home and armed mode.  If it’s the back door that's opened in this mode, the alarm will sound immediately.

Our favorite security system for do-it-yourself monitoring and home automation is the $280 Abode Essentials Starter Kit, because not only does it add professional monitoring to your home, but it also works as a smart hub for third-party devices and helps facilitate home automation. But if you're looking for something a little more affordable and dead-simple to set up, Ring Alarm is worth  a look.
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.

I’m in the rocky mountain region where it occasionally gets well below -4 and can verify your reader’s quote about cold weather limitations w Nest outdoor. I asked Nest support about this and they suggested that a different product might make sense. Seems like there really isn’t a good DIY option for users that live in cold weather? Arlo pro battery life is impacted, Flex only rated down to 14F and Nest said I should try a different product in cold weather.

Away mode enables a countdown timer which you can set from anywhere between 30 seconds to 3 minutes. This gives you time to exit your home or cancel the alarm if need be. Once the timer reaches zero, a notification is pushed to your phone letting you know the system is armed. You’ll also hear an announcement (if you’re still in your house) through the base station that the house is now armed.

My gate is too far from my router so I would prefer to hardwire the doorbell. I would rather not use an extender. I ran CAT5 when I installed my old doorbell (which is now outdated and does not have software to use on my iphone). Is my only option the Ring Elite? I have the Arlo set up indoor, but I was not sure if Arlo was going to make a doorbell. Any thoughts?
With Password Protected Sharing, you can share access to your video stream with up to ten people who have both the link and the password. Public Sharing is self-explanatory; it’s access to your live stream without a password. Both Public and Password Sharing allow others to view a live stream of your video, but they cannot view your video history, receive alerts, control cameras, or your other connected devices.
Jamie Siminoff, Chief Inventor and Founder of Ring, said: “We’re excited to continue expanding the Ring of Security with Ring’s first indoor/outdoor cameras. Ring Stick Up Cams give neighbors maximum flexibility to position the cameras anywhere, regardless of power availability, to secure every corner of their property. Every decision Ring makes is driven by our mission to reduce crime in neighborhoods; it’s important to have multiple layers of home security, and the Stick Up Cam line offers affordable, easy-to-install security for both inside and outside of the home.”

Also, Ring thinks it can do more than others in this space because of its overarching mission, which has focused much of its product development to date: Creating a so-called “Ring of security” that extends across the home and into the neighbourhood. Protect is a big part of that plan, because it deepens the relationship that Ring has with its customers, and allows it to gather data to help truly hone and personalize its alert system and monitoring services.
Mair, I installed the Spotlight Cam and have been running it for a few days. I updated the content above, and I’m working on a separate review (which I will publish after Thanksgiving). So far it’s fine. There are some limitations with the Solar version, which is the same as the Battery version. One, you can’t create Activity Zones, that is limited to the Wired version only. Two, you can’t schedule the lights. The lights will turn on when motion is detected and you can trigger them manually, but that’s it. I’d say that the motion detector performance is on par with the Ring Video Doorbell. It includes the same feature that allows you to adjust motion sensitivity. There is no way to weed out false alarms, and sometimes I get alerts if the wind blows too hard. The camera wakes up fast, faster than my doorbell. The video quality is just okay. It doesn’t look like 1080p to me, it looks like 720p. Two-way talk works well. I was surprised that the cameras don’t play together. For example, if my doorbell detects an alert, I can’t trigger Spotlight to record. Spotlight doesn’t work with IFTTT so it’s not possible through their service, and though it works with Stringify, you can’t create this sort of relationship between cameras using Stringify. What else do you want to know?
You can place the keypad on a flat surface like a table or shelf, or you can mount it on the wall. Just remember that it needs a Micro USB cable for power, but that doesn’t mean it needs to be placed close to an outlet. Ring says its internal battery will last six to twelve months depending on usage. As a result, you could potentially place the keypad anywhere in your home and charge it every so often.

Security professionals demand performance and features that make Security professionals demand performance and features that make their lives easier. They rely on the latest technology to reduce installation costs increase reliability and capture clear video. AvertX cameras use professional grade hardware that is designed for any location where video surveillance would provide peace of mind including your home ...  More + Product Details Close
×