Ring Alarm hits nearly all the right notes for a basic DIY home security system. I’ve already touched on a couple of its shortcomings—including an absence of support for smart speakers—but tighter integration with Ring’s own cameras would be another welcome development. When an alarm is tripped, the cameras should begin recording to perhaps capture a glimpse of what triggered it—potentially valuable forensic evidence you could provide to the police investigating a break-in. And if Ring Alarm could control your home’s smart lighting, it could turn on all the lights if the alarm is triggered after dark, which might convince an intruder to make a hasty retreat.
Ring’s sensors operate on battery power, the keypad and base station come with AC adapters, and the Z-Wave range extender plugs directly into an AC outlet. All three of those components have battery backup, so the system will continue to operate in the event of a power outage. The base station connects to your home network via hardwired ethernet or Wi-Fi. A Ring Protect subscription activates an LTE module in the base station that will keep the system connected to the internet if your broadband connection goes down. You can even run the keypad on battery power full time if you choose, since most homes don’t have AC outlets right next to doors. An LED will tell you when the battery needs to be charged.
So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.
Press Continue and follow the video instructions to press the button at the top of the device, at which point the LED will begin flashing white. Press Continue again and go to your phones Wi-Fi settings to connect to the camera. Return to the app, select your home Wi-Fi from the list, and enter your password. Within seconds the camera will connect and you'll have the option to view a video tutorial that will walk you through the physical installation, or you can skip this step and use the written instructions. In the final step you'll be prompted to define Motion Zones, but you can come back to this later if you prefer.
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
There are many great brands out there that make it easy for you to find the security products that fit your unique needs. Two such options are the Ring and Nest systems. These popular brands have developed a range of products to help you easily build and customize your home security ecosystem. In order to help you choose the right system for you, we’ve broken down the pros and cons of each. Here’s a quick rundown of the main features you should keep in mind when deciding between the two:
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
The white base station is the brains of the system. It measures 1.4 by 6.6 by 6.6 inches (HWD) and has a 1.5-inch LED ring and a speaker on top, and a USB port and a LAN port around back, joined by a pairing button, a reset button, and Wi-Fi and power indicators. The base contains circuitry that supports numerous wireless protocols including dual-band 802.11n Wi-Fi, Z-Wave, Zigbee, Bluetooth 4.1, and LTE cellular as a backup if you subscribe to the Ring Protect Plus plan (more on this later). It also has an internal backup battery that will provide up to 24 hours of power in the event of a power loss, and a loud 105dB internal siren.
Mair, I installed the Spotlight Cam and have been running it for a few days. I updated the content above, and I’m working on a separate review (which I will publish after Thanksgiving). So far it’s fine. There are some limitations with the Solar version, which is the same as the Battery version. One, you can’t create Activity Zones, that is limited to the Wired version only. Two, you can’t schedule the lights. The lights will turn on when motion is detected and you can trigger them manually, but that’s it. I’d say that the motion detector performance is on par with the Ring Video Doorbell. It includes the same feature that allows you to adjust motion sensitivity. There is no way to weed out false alarms, and sometimes I get alerts if the wind blows too hard. The camera wakes up fast, faster than my doorbell. The video quality is just okay. It doesn’t look like 1080p to me, it looks like 720p. Two-way talk works well. I was surprised that the cameras don’t play together. For example, if my doorbell detects an alert, I can’t trigger Spotlight to record. Spotlight doesn’t work with IFTTT so it’s not possible through their service, and though it works with Stringify, you can’t create this sort of relationship between cameras using Stringify. What else do you want to know?
Wow! I’m impressed that you read the whole thing. A mobile hotspot, right? I think they would all tell you that it’s possible, but not something they recommend. The signal isn’t going to be as reliable as connecting to a WiFi network. Arlo sells a 4G camera called Arlo Go, but it’s more expensive upfront and the monthly fee is higher as you’re paying for cellular connectivity.
Arlo Smart also adds the ability to use Activity Zones even when your cameras are unplugged; however, if you choose to keep your Arlo Pro 2 indoors and plugged-in, you will have Activity Zones for free. Either way, you can select up to three zones for Arlo to monitor. If activity is detected in one of your zones, you’ll receive an alert. Activity that occurs outside of your set zone will be ignored.
I don’t think I mentioned the answer in this article, but I know I’ve talked about this elsewhere. Unfortunately, all I can remember is abode and Ring. I can’t remember anything about Nest. All abode devices and sensors use the abode RF encrypted protocol to talk to the gateway. They also encrypt all communication between the gateway and the cloud. Ring uses Z-Wave Security 2 and Z-Wave SmartStart technology which encrypts the signal between the base and cloud as well as the base and sensors.
The spotlight is provided by LED light strips on either side of a 140-degree wide-angle lens, which activate when motion is detected. The motion sensor, encased in a dome on the bottom of the camera, has a 270-degree detection range. The camera streams and records video in up to 1080p resolution and supports two-way talk with noise cancellation and night vision up to 30 feet.
True. I do feel like I touched on most of my “what’s best” thoughts in the Final Thoughts section. I would take from abode the free and vast integrations which extend to its ability to work with so many security-related devices (glass break sensors, flood sensors, freeze sensors, key fobs, etc.). I would also take their optional on-demand monitoring plans, free cloud storage, and geofencing. I would take from Nest their fabulous camera technology, design, and overall experience (voice prompts, clean app experience, etc.). From Ring, I would take pricing and extended battery backup.
Use the Device Health button to view signal strength, firmware version, and the current Wi-Fi network you are connected to, and the Linked Chimes button lets you enable motion settings for any Ring Chime devices you may have installed. Motion Settings lets you adjust sensitivity using the slider, create detection zones, and set up schedules for enabling/disabling motion alerts, and Motion Snooze lets you temporarily turn off alerts. Tap the Shared Users button to invite friends and family to view video clips, and the App Alerts Tones button to assign one of a dozen sounds to play when motion is detected.
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
Where Nest Wins: Nest has a better design, fantastic cameras, and cheaper cellular backup. Their multi-purpose sensors may cut down on the number of sensors you need, though they are more expensive than abode and Ring sensors. Also, Nest Guard is the most intuitive with LED lights, a keypad, and voice feedback. Finally, Nest Secure offers a 2-year warranty where abode and Ring offer 1-year warranties. However, there are areas where abode and Ring win too.
Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
Nest Indoor or Nest Outdoor? There are pros and cons to both. The Nest Cam Outdoor might be slightly more accurate, but that’s probably more to do with positioning – it has a better vantage point. The fact that it is more accurate, has sound, and night vision made me want to switch, but I could not deal with the way it looked once installed. In the end, Nest Hello provides CVR with the clean aesthetic that’s important to me.
After shipping later than expected, is the Ring Alarm still worth your time? There are a bunch of alarm systems available that you can buy and install yourself these days, but there are a few key points that make the Ring Alarm stand out. From the ease of installation to the low monthly costs, the Ring Alarm system ticks a lot of boxes on paper that people will be looking for, but how does that on-paper experience compare to the real-life one?
Hey- just happen to be reading this, and full disclosure I’m one of the canary founders. Our battery is designed to sub – temperatures and i had mine sitting under snow and it still worked (though video was white as it was… well… under the snow). We say it goes to -4 degrees F (-20C). But yea, the battery won’t last as long in that cold, but you can keep it plugged in, or just charge it overnight to get it back up and running. Cheers, Adam
Unfortunately, Ring doesn’t currently, nor does it appear to be adding any type of home automation features, but it is compatible with many third-party smart home services. Although Ring doesn’t offer professional monitoring services, they do offer live streaming when hardwired to your existing doorbells power supply. Ring Live View does not work when using the internal battery. Since most users prefer to use the Ring internal battery, paying for one of the Ring video recording packages is the ideal option.