Hi and thank you for the exhaustive review. I like the option of Ring Doorbell Pro. However, my existing doorbell is on the side of the house, facing parallel to the door across the front steps. If I mounted the Ring there, the camera would capture a profile of the visitor as they approach the door. It would not capture their face head on, would not (likely) capture them them as they approach the steps, which is where delivery people often leave packages (my interest in Ring, Arlo, etc., came out of the neighborhood social app conversation about a rash of package thefts), and would not capture the car they drive as it would face parallel to the street, not into the street. My question is: what would the installation of Ring look like on or near the front door, where there is no existing wiring? Is my existing setup enough to steer me away from Ring and toward a battery powered option?
haha. Don’t do anything that will make you sad :). I upgraded my internet package and purchased three Google Wifi routers to create a mesh network. Though this upgrade did nothing to improve Flex’s overall performance, it did help with connectivity a touch. Flex’s performance improves when plugged-in and it’s possible that the battery experience will improve over time. Canary has already proven their ability to make a product better – just think about where they started with the original Canary.
The camera connects to the included wall mount using a ball socket. If you’re installing on brick or another hard surface, you’ll need to drill and insert wall anchors. If you’re installing your camera onto a wooden surface, you can use the included screws and screwdriver to secure the mount. I wasn’t sure if I wanted to keep Spotlight Cam so both options seemed like rather permanent solutions. I decided to create the most unattractive, temporary solution.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
The next step is camera placement, and Arlo Pro offers a few options. It can sit on a flat surface, stick directly to a metal surface (magnetic), or you can use the included plate to mount it to a wall. While you can place Arlo inside or out, the camera’s power cord that ships with the package is not weatherproof so plan to use battery power when placing the camera outside. If you’re willing to spend an extra $25, you can also buy the weather-resistant outdoor power adapter (VMA4900) that works with Arlo Pro, Arlo Pro 2, and Arlo Go. Finally, they also sell an $80 solar panel. The panel works with Arlo Pro, Pro 2, and Go, and can power one camera continuously. Keep in mind, however, that the solar panel only powers the camera. It does not charge the camera’s battery.
You can set motion zones for the lights, too. In this case, the app shows a graphic representation off the motion sensor’s 270-degree range, and you can define where you want movement to turn on the lights by tapping up to three preset zones and then expanding or reducing coverage in those zones using a slider. Depending on your settings, the light will stay on for one to 15 minutes.
After shipping later than expected, is the Ring Alarm still worth your time? There are a bunch of alarm systems available that you can buy and install yourself these days, but there are a few key points that make the Ring Alarm stand out. From the ease of installation to the low monthly costs, the Ring Alarm system ticks a lot of boxes on paper that people will be looking for, but how does that on-paper experience compare to the real-life one?

Ring's professional monitoring isthrough Rapid Response Monitoring Services, and it's one of the more affordable services available. For $10 a month (or $100 a year if paid up front), you get the benefits of dispatchers on standby, and this includes video storage for any Ring cameras you might have. There's no long-term contract, either, so you can cancel any time you don't need it through the Ring website.


I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
How far away would the two doors be from an available Ethernet outlet? My thought is that you could use a system where the cameras actually talk to the base station, not the internet. Arlo, for example, uses cameras that talk to the base station directly. When the base station is plugged into Ethernet, it creates its own WiFi network which the cameras connect to directly versus connecting to your home network. The hard part would be that the base station needs to be in a central location between the two doors and, as I stated, connected using Ethernet. In a perfect world, you can place the Arlo cameras up to 300 feet away from the base station, but lots of things can obstruct their ability to talk to the base like walls and doors.
Meet Oco next generation Full HD Home Monitoring Meet Oco next generation Full HD Home Monitoring Camera with SD Card and Cloud Storage. Monitor everything you care about: your home children pets elderly parents business etc. Setup Oco2 in less than 60 seconds and access Full HD video remotely with our App. No Monthly Fees required to activate ...  More + Product Details Close
×