I’m in the rocky mountain region where it occasionally gets well below -4 and can verify your reader’s quote about cold weather limitations w Nest outdoor. I asked Nest support about this and they suggested that a different product might make sense. Seems like there really isn’t a good DIY option for users that live in cold weather? Arlo pro battery life is impacted, Flex only rated down to 14F and Nest said I should try a different product in cold weather.
If you already own or are considering investing in any of Ring's security cameras or doorbells, the Ring Alarm will eventually tie all of your devices together in a seamless home security solution. For now though, if you want a DIY home security system that offers lots of add-on devices, including an indoor camera, the SimpliSafe Home Security System is your best bet and remains our Editors' Choice for DIY security systems. If you want a system that is big on home automation, check out the Abode Home Security Starter Kit, another Editors' Choice winner. As with the Ring Alarm system, it offers multiple wireless radios, but it already works with plenty of third-party devices, has its own IFTTT channel, and supports Alexa voice commands.
The Home mode monitors only sensors installed at entry points into the home but will ignore any motion or movement that occurs within the house itself. The home mode works great for a night setting, especially if people in your family are prone to moving throughout your home at night. Typically this movement would trip the sensors, but not in Home mode.
I’ve heard others say Arlo is the perfect outdoor camera. I disagree. The original Wire-Free camera had more latency than Arlo Pro. Also, Pro includes a wider field of view, a rechargeable battery, a siren (built into the hub), and it adds sound with two-way audio, all features the original Arlo lacked. Arlo Pro 2 bumps up the resolution to 1080p and adds three features if the camera is plugged-in: CVR, Motion Zones, and Look Back.
The camera is powered by the same quick release battery pack used on the Ring Video Doorbell 2. It contains a mini USB charging port and is rated to last for six to twelve months between charges depending on camera and spotlight activity. The camera can hold two battery packs and will automatically switch over to the secondary battery when one runs out of juice. Additional battery packs are available for $29 each. If you prefer a wired solution, Ring sells a Spotlight Cam Wired model for $199.
Ring offers access to a timeline-style feature where you can view events going back six months (if you are subscribed). From the timeline, you can sort through ring events, motion events, starred events, or live view events. From the web app, you can also sort by device so that you can separate your Spotlight Cam footage from footage captured by your other devices. Right now, the feature isn’t very advanced. Soon, Ring plans to completely revamp their mobile app.
Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.
Many alarm systems integrate base station and keypad functionalities into a single unit, but Ring has made an interesting decision to separate the two, recognizing that these don't always need to be colocated. The base station serves best located centrally in the home in order to optimize wireless connections to all sensors and to centralize the alarm sound, while the keypad is likely to be placed close to the main point of entry for easy access.
The Spotlight Cam captures video at 1080p and has a 140-degree field of view, but lacks the pre-buffered recording capabilities that you get with Netgear's Arlo Pro 2 camera and the Ring Video Doorbell Pro. It uses four infrared LEDS to provide up to 30 feet of night vision and has a built-in 110dB siren, an 802.11n Wi-Fi radio, and a speaker and microphone for two-way audio. The spotlight itself consists of two strips on either side of the camera, each with four LEDs that provide an overall brightness of 700 lumens with a 4,000K color temperature. The camera comes with one battery pack, a mounting bracket, wall screws and anchors, a screwdriver and drill bit, and a setup guide.
EverCam is a newer option made by a Chinese company who has never made a security camera before. That said, despite their Kickstarter success, I’m hesitant to recommend the camera even though it boasts an impressive feature list. For one, they refused to answer my in-depth questions about the camera which makes me a little suspicious. Two, they are promising many AI-rich features without a monthly fee. As a consumer, I know that’s tempting, but I also know it’s unsustainable. Facial recognition, for example, does not live on the camera itself. The feature is cloud-based which is expensive to maintain; hence why you see companies like Nest charge a fee to access features that are heavy on AI.
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
A Ring home security system can get pricey, as you need to pay upfront for the devices. The plans are straightforward, so you won’t run into any confusion there. The low monthly cost of the plans makes the premium features accessible for any budget, especially if you only have one or two Ring devices. The real question is whether Ring offers enough value compared to the other systems on the market. If you’re willing to take a more DIY approach with installation and you don’t mind a lack of home automation features, then the Ring is a contender.
Enjoy superior image quality courtesy of the 4MP Enjoy superior image quality courtesy of the 4MP sensor delivering twice the resolution of 1080p for stunning clarity. Wide Dynamic Range enriches your image quality with deep blacks contrasted whites and vivid colors so images appear true to life. Infrared LED's give you up to 100 ft. of night vision ... More + Product Details Close
This has to be some of the worst customer service I have ever experienced. The web site is very slick, and the pre-sales information is very well prepared. The product does not work, and my Wi-Fi extender (that I bought just for this purpose) didn’t even get a usable signal from 15 feet away with no obstructions. So, after long chats (and waiting a LONG time to get someone on chat in the first place), I convinced them after several conversations to give me a refund… which never came. Three weeks after they received the product back, there was no refund. I went on chat to find out why, and TWO HOURS of chatting later (after their chat system kicked me out for inactivity while THEY looked up my information), they say a refund was issued, but refused to provide any email documentation stating such. This is absolutely unacceptable. I wish I had come to this site to look at these reviews before I wasted time and money on a product that doesn’t work, and which is supported by an incompetent support staff. RUN AWAY from this company! They pretty much stole $500 from me!
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
The latest addition to Ring's home security platform, the Ring Alarm Security Kit ($199), contains everything you need to protect and keep tabs on your home. As with other DIY smart home security systems, installation is quick and easy, and you can either self-monitor or pay a modest fee for a professional monitoring service. The system worked well in our tests, but we were surprised to find that it offers limited support for third-party devices, and although it uses the same app, it doesn't interact with other Ring cameras or doorbells, at least not yet. For the time being, we continue to recommend SimpliSafe as our Editors' Choice.
The kit comes with a base station, keypad, contact sensor, motion detector, and range extender. Since Ring is pre-packaging all of this, all of the pieces are designed to automatically talk to each other, which makes setting them up easier, but could lead to some confusion when things go wrong. You won't be able to take any of these parts and integrate them with another Ring Alarm system, just the one they come with.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.
If you just want an indoor and outdoor camera (not a doorbell), I would recommend Arlo Pro or Pro 2 outside and Arlo Pro/2 or Arlo Q inside. However, it would be best if you could place your Base Station in a central location. The Arlo cameras talk to the Base Station and the Base Station connects directly to your router (or Ethernet outlet or range extender).
Disclaimer: The information featured in this article is based on our best estimates of pricing, package details, contract stipulations, and service available at the time of writing. All information is subject to change. Pricing will vary based on various factors, including, but not limited to, the customer’s location, package chosen, added features and equipment, the purchaser’s credit score, etc. For the most accurate information, please ask your customer service representative. Clarify all fees and contract details before signing a contract or finalizing your purchase.
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.
Is the Nest Outdoor can really secure? If you have to run the cable to a power outlet, outside and clearly visible, it seems to me that more than an eye sore it’s simply insecure. Anyone could walk up and unplug it. Sure it may catch a snap of the person prior to that, or it may not if they person makes the right approach. Either way, it seems insecure to have an outdoor camera that anyone could easily take offline. Thus I wonder if the extra $ for the IQ are worth it, just for that reason vs any of the other enhancements that they market, as I agree with you those feature do not seem to be worth the large price increases (which is more than doubled).