Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.
I’ve enjoyed reading your summaries for over a year. I initially had my mind set on Abode after removing iSmartAlarm and SimpliSafe (previous generation) from consideration. I had an Abode package all set and nearly pulled the trigger on a purchase. However, after coming across Ring and reading your review multiple times, I ultimately went with Ring. What won me over was the package being offered by Costco that has six door/window sensors. When I priced out what Abode would cost to have comparable coverage, Ring clearly won out. I don’t need any integrations or automation, thus I don’t feel I’m losing out on those aspects by selecting Ring over Abode.

In addition to sharing camera access, having multiple users will make geofencing even more intelligent. The cameras will arm when everyone is away and disarm when at least one person is home. You can also see who is home and who is away using the mobile app and set up Presence notifications to alert you of the same. Finally, it brings everyone in on the action. If an event is detected, an alert will be sent to all users. If one user responds to the alert, other users will be able to see how that person responded. You can also leave a comment on the event and chat with other users directly within the app.

Ring’s sensors operate on battery power, the keypad and base station come with AC adapters, and the Z-Wave range extender plugs directly into an AC outlet. All three of those components have battery backup, so the system will continue to operate in the event of a power outage. The base station connects to your home network via hardwired ethernet or Wi-Fi. A Ring Protect subscription activates an LTE module in the base station that will keep the system connected to the internet if your broadband connection goes down. You can even run the keypad on battery power full time if you choose, since most homes don’t have AC outlets right next to doors. An LED will tell you when the battery needs to be charged.
The Ring Security System can be a great option, there are just some things you need to keep in mind before you jump in and purchase the system. Instead of chancing it on a company that is just getting started in the home security business, why not go with a company that is absolutely committed to protecting homes and families and has been for many years. Protect America has a proven track record as the 14th largest residential home security company and a Nine-Time Consumers Digest Best Buy Winner. If you’re looking for a tried and tested home security system, contact Protect America for a free quote today.

For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.
I have! That is a white box piece of hardware used by several companies so I actually have that same exact camera from another company. I don’t love it, but for the price, it’s a good choice. Of course, a huge portion of the experience is not just hardware, but user experience. I don’t know how Wyze will deliver on that side of the equation, but I’ve ordered a Wyze Cam for Bethuel to try, another writer on this site, can’t wait to hear his thoughts.

It's a good replacement for those looking to lower monthly cost for professional monitoring. The system is easy to set up and there are lots of options. I'm not sure the set up could be any easier. Here is what I don't like, but not a deal killer. The sensors for the doors are huge! They are literally twice the size of the previous sensors from my old company. I also don't like that you only get one contact sensor in the base option. I have three doors to my house and 7 first floor windows. So, you have to buy quite a few additional sensors to cover them all. So, the initial cost can add up fast. But, since monitoring is cheap, it pays for itself after a few months. I have integrated a door bell camera and a spotlight camera for the yard. Those are both battery powered. Both are fairly bulky compared to some of the competition. I'm hoping it's durable though. The thing to remember if you get any battery powered devices is to get extra batteries. The batteries take a LONG time to charge. I have 4 batteries and each took about 8-10 hours to charge. If you have an "extra" charged battery or two around, then you don't have to take your cameras offline for a half day to wait for the batteries to charge. Just swap in the extra one and recharge the other and leave it waiting for the next time something dies. All in all, it's a good system, but not cheap to get setup properly initially. The intro price is good, but by no means a complete system. Unless you live in a one door apartment with no windows, you are going to need to buy additional stuff to complete the system. Hopefully, with the money i'm no longer paying to my old monitoring company, I can make up the upfront cost of setting this up.

Once the base station is online and your account set up for monitoring, the rest of the devices in your starter kit are automatically identified in the Ring app and you can set them up one by one. With each one, you can provide a name and room location to help identify the accessories in notifications and the app. With the keypad, you'll set up an access code that lets you arm and disarm the alarm, and you can set up different codes for different people. As you set up each motion detector and contact sensor, the app will have you test each one to ensure that they're probably detecting events.

During my extensive research for a cost-effective security solution in 2017 I compared various offerings from different vendors. The Ring was one of the 3 that made my list.Once Ring ceased sales because of a lawsuit, I decided to wait instead of deciding on the other 2 home security solutions because Ring was the cheaper of the 3. I waited and pre-ordered soon as I got the long awaited email and I'm glad I did because it is worth it! The setup up was simple and I was up and running within minutes. Placing the sensors is key and the provided adhesives make the installation quick, if you do not want to use the mounting screws. The modes are helpful (Unarmed, Home and Away). Even if your system is on the 'Unarmed' mode, you still continue to receive alerts in the Ring App on activity from the Motion and Door/Window Sensors. I added an extra range extender which was very easy to add and took less than a minute to be adopted into my system. The range of the devices quiet well, I'm getting coverage for a 1200 square foot area just without the extender. The sensors light up when it senses activity and a ping is heard on the base station. You can adjust the volume for the base station so it is not too loud. Highly recommend this because it is user-friendly, and the sensors work great. Ring support is always there to assist if you need help.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
WINNER Nest, Canary, and Ring all provide excellent tech support experiences, but a general word to the wise: When you self-monitor your home security system, expect to do some troubleshooting from time-to-time. It’s an inevitable part of the process. Most of the outdoor devices I’ve tested have had issues, though Nest appears to be leading the way.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
Most of my setup time was spent testing the position of the three contact sensors I received. The magnetic sensors consist of two parts. One part goes on a door or window frame, the other part goes opposite it so that when the door or window is opened, the magnetic connection is broken. If the two pieces aren't close enough, roughly half an inch, the sensor doesn't work.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Thank you so much for your great review! It’s so thorough and really helps with decision-making. My question is, what would you pick between the Ring Cam Battery and the Arlo Pro (not the 2)? I purchased the Ring Spotlight Cam Battery because I liked the idea of the light and the battery power, but as i read my reviews, I see that the video can lag, and it’s quality is highly tied to the WiFi signal. I also bought the Arlo Pro because it was on sale and it seemed to get really top reviews even though it’s only 720p compared to the Ring Cam Battery. I will be mounting these outside. I noticed that the Arlo Pro 2 way talk is really hard to hear compared to the Ring Cam Battery. Thank you again for all your information!

Unfortunately, Ring doesn’t currently, nor does it appear to be adding any type of home automation features, but it is compatible with many third-party smart home services. Although Ring doesn’t offer professional monitoring services, they do offer live streaming when hardwired to your existing doorbells power supply. Ring Live View does not work when using the internal battery. Since most users prefer to use the Ring internal battery, paying for one of the Ring video recording packages is the ideal option.
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
Rose, thanks for the great review! Paul, I have a Video Doorbell Pro and a Floodlight Cam — both are hardwired. Both lag at least seven seconds behind real time and sometimes even longer. During the lag, the would-be burglar is gone or could be in your house. Ring’s ads suggest you see things in real time which is not the case for me. The signal strength and wifi speed both test excellent. I hope this helps you. Nick

Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.

However, traditional home systems typically require the assistance of a professional installer. They also mean monthly subscription fees and long-term agreements that keep you locked into their service for a certain period of time. Additionally, if you move, it’s nearly impossible to take your home security system with you, and they don’t make much sense in an apartment complex.

Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
The Ring Alarm system has three different modes, which can be set via the keypad or through the iOS and Android apps. There’s the standard disarmed mode that turns off all of the monitoring; an away mode that watches all of the installed sensors for intrusions; and then a “Home” mode, which by default will monitor sensors installed on entryways, but ignores motion inside the house. I’ve used the latter mode as basically a night or sleep setting, since during the day my family moves in and out of the house a lot and would constantly trip the door sensors.
Arlo Pro is preprogrammed with four modes: Armed, Disarmed, Schedule, and Geofencing. Most of the modes are customizable, and you have the option of adding your own customized mode. You can even create different rules for different cameras. For example, armed mode on camera A might mean that if it detects motion or audio, it will record, while armed mode on camera B might mean that if motion is detected, it sounds the siren, but doesn’t record. You can also decide if you would like push alerts, email alerts, or no alerts.
Be prepared with a Ready America Cold Weather Be prepared with a Ready America Cold Weather Survival Kit. Our two-person kit contains essential lifesaving items including food and water survival blankets body warmers and hand warmers a snow shovel to dig your vehicle out of tight spots a flashlight/radio/cell phone charger and more. When winter comes cold weather ...  More + Product Details Close
The Amcrest ProHD 1080p Wi-Fi video camera helps The Amcrest ProHD 1080p Wi-Fi video camera helps you stay in touch with what you love anytime anywhere. With its 60-second mobile setup process you will have secure access to your camera's video stream in no time. Stream live and playback recorded video of your home your kids your pets ...  More + Product Details Close
×