Hey- just happen to be reading this, and full disclosure I’m one of the canary founders. Our battery is designed to sub – temperatures and i had mine sitting under snow and it still worked (though video was white as it was… well… under the snow). We say it goes to -4 degrees F (-20C). But yea, the battery won’t last as long in that cold, but you can keep it plugged in, or just charge it overnight to get it back up and running. Cheers, Adam
Ring's mission is to reduce crime in neighborhoods by creating a Ring of Security around homes and communities with its suite of home security products. The Ring product line, along with the Ring Neighbors app, enable Ring to offer affordable, complete, proactive home and neighborhood security in a way no other company has before. In fact, one Los Angeles neighborhood saw a 55 percent decrease in home break-ins after Ring Doorbells were installed on just ten percent of homes. Ring is an Amazon company. For more information, visit www.ring.com. With Ring, you’re always home.
Motion detection was responsive and accurate with the default settings, which placed the sensitivity midway on a scale between “people only” and “all motion.” You can adjust this to your liking with the slider, or use it in combination with customizable motion zones. With each alert, Chime Pro simultaneously emitted a digital Ring. This ensured I was kept aware of detected activity even when I was home, as I don’t usually carry my phone around the house. You can change the chime’s sound and volume and “snooze” it for periods of time in the Ring app.
As with all Ring products, the Spotlight Cam is easy to install. Start by charging the battery, downloading the Ring app, and creating an account. Make sure you're close to your router, select Set Up Device in the app, and choose Spotlight Cam Battery from the list of Security Cams. You'll be asked to name the camera, confirm your address, and insert the fully charged battery in the compartment. The LED will flash blue and white for a few seconds and then go dark.
At 3.2 by 0.9 by 0.9 inches (HWD), the Z-Wave contact sensors for doors and windows are bulkier than the sensors that come with the Vivint Smart Home system (2.5 by 1.0 by 0.5 inches). They're each powered by a CR123 battery that is rated to last three years and can be installed using double-sided tape or with mounting screws. The motion sensor (3.5 by 2.4 by 1.7 inches) also runs on a CR123 battery and uses a Z-Wave radio to communicate with the base station. The range extender (3.1 by 1.8 by 1.1 inches) plugs into a wall outlet and extends the Z-Wave signal by up to 250 feet, so you can place sensors just about anywhere.
Was Ring too quick to announce the launch of this new product? They have launched their security cameras without any bumps but they are being sued by ADT and halted by a judge from selling their security system until the court has reached a verdict (story here). ADT is claiming intellectual property violation. Since they are the largest company in the industry surely they want to slow down Ring anyway they can, and this is sure doing a number on them at the peak of their launch.
Setup of Ring Alarm is quite simple, and the whole process only took me about half an hour, although I used the included adhesive strips to mount sensors and didn't mount the base station and keypad to my walls, so it would have taken a bit longer if I'd gone all-in with hardware mounting options. I may yet do that once I've decided for sure where I want to put the various components.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
Biggest problem though is the ‘wake up’ time. You reported on it, but I didn’t really take the time to really consider, “Hey, if I want to catch the kids driving by banging mailboxes, by the time they drive by and the camera wakes up, they’re gone!’ Well, that’s just what I learned as I set everything up, had the ap working and started getting notifications when people drove by. I thought AWESOME! it works! Well, not so much. Unfortunately, the car is never seen on the video, so the purpose is pretty much defeated.
The camera uses the same Android and iOS mobile app as the Ring Floodlight Cam and all of the Ring doorbells, and you can access it from a PC using the web console. The Spotlight Cam appears in the list of installed Ring devices in the app: tap it to access its dashboard screen where you can turn motion alerts on and off and check the battery level. Tapping the Live View button launches a live video stream in landscape mode with buttons for turning the spotlight on and off, sounding the siren, recording and sharing a clip with neighbors, push-to-talk (two-way audio), muting the sound, and ending the stream.
All of these limitations make the Ring Alarm feel less like a cohesive part of an integrated smart home and more like a bolt-on appendage that requires its own app and accessories. For its part, Ring says that smart home integrations are coming, but it wanted to make sure that it had nailed down the security aspect of the system before adding to it. The company says it plans to add integrations with lighting, door locks, and other smart home gadgets down the road, but it wouldn’t provide a timeline for these options when I asked.
I haven’t had that problem, and as you said, I’m running it hardwired. My clips include a front facing image of guests. That said, I’ve recently had issues with wake up times when I’m away from home. As an example, I answered a ring alert yesterday, but it just kept spinning. I had to hard close the app, open it back up, and then check the alert. By then, the guest was gone.
I actually bought mine from Home Depot. So Ring has some work to do with this product as it was put out into the market too early with some engineering issues. First off I will say that during the DAY the camera works just as good as the ring doorbell. I get consistent motion alerts in the Daytime in the zones I set up with the camera. However during the night its a different story. I set up the camera on the soffit of my garage which is 8 feet from the ground. Ring specifically says that you CAN mount on the soft (under the roof line) of a house, however when mounting the camera the installation instructions say that the sensor under the camera (the big globe white thing) must be parallel to the ground. Unfortunately Ring poorly engineered the camera where the vertical axis of the arm for the camera would not allow me to adjust the camera angle any higher so that the sensor would be horizontal to the ground. Due to this the camera and floodlights will not sense me during the night until your 5-8 feet away from the thing which is totally counter productive to what I bought the whole camera floodlight combo for. I am still currently working with Ring customer support on this but it might end up with me making another hole in my garage to mount it on the side but I do not want to do this until I get a firm answer from Ring that this will work. As far as connectivity and video quality I have no issues. But to sum this review up DO NOT BUY IF YOUR MOUNTING TO A SOFFIT 8 FOOT OR LOWER. I will update my review when necessary.