Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.


It would have been nice to see more smart-home integration between the Ring Alarm and other well-established third-party names, if only because the company has already set such a precedent for itself in this area. Buying it won't introduce any new tricks to an existing Ring doorbell, either, but if you're already in the ecosystem and you're looking to expand, this $200 starter kit is a sure fit.
My indoor Canary is self-sufficient, and that is exactly what I want in a home security camera. Flex has yet to provide that same experience. I’ve had to physically interact with the device multiple times to get it to reconnect to my internet. Also, the geofencing feature is inaccurate, often marking me away while home and vice versa. As for power loss notifications? They’re hit or miss.
Ring, maker of one of the original (and still likely the best) connected video doorbell, has launched a comprehensive home security system called Protect, which retails for $199 and includes a base station, keypad (for arming and disarming) a contact sensor for a window or door, a passive infrared sensor for detecting motion and a Z-Wave extender for adding range to smart home devices that use the standard.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
Person Detection was the first feature launched under the Canary Vision project, a project that aims to add AI-powered intelligence to Canary devices. The second Canary Vision feature is Package Detection, which lets users set up notifications for when packages are delivered to their homes. This feature is exclusive to Canary Flex, and it can only be accessed if you have a Canary Membership.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.

The abode Gateway is responsible for communicating with and controlling all connected devices. Compared to Nest Secure, abode offers a wider array of equipment. Unfortunately, their equipment isn’t as modern looking as Nest’s nor do they offer any multi-purpose devices. However, they do sell everything you need to secure your home. Each Gateway can support up to 150 connected devices and up to six IP Streaming Cameras.


As with all Ring products, the Spotlight Cam is easy to install. Start by charging the battery, downloading the Ring app, and creating an account. Make sure you're close to your router, select Set Up Device in the app, and choose Spotlight Cam Battery from the list of Security Cams. You'll be asked to name the camera, confirm your address, and insert the fully charged battery in the compartment. The LED will flash blue and white for a few seconds and then go dark.
I’ve settled on continuous video for my outdoor cameras too. Obviously, I use Nest for that. For indoor cameras, Arlo Q is also an option. For $9.99/month, you can add continuous cloud recording. SpotCam also has continuous cloud recording, but we haven’t tried it. Of course, there are other options where you store the footage locally, but then the trouble becomes finding usable footage when you need it!

First of all, I live in a very cold winter climate. (Sometime up to – 35) Also, I’m looking for a outside cam with great night vision. I wan’t to be able to get alerts on my phone. I’m not interested to pay for cloud. I want to be able to save motion detected video on my computer or phone. A plus would be be able to talk to the person outside and an alarm would be a plus. (looking for Wi/Fi and battery operated.)
I have tested Reolink Argus and Argus 2. Both are indoor/outdoor, hubless, battery-powered cameras. The cameras do not offer cloud storage. Instead, you can purchase and add an SD card. The cameras record in FHD 1080p, offer night vision, live streaming, mobile app access, and a 130° field of view. However, they lack other features offered by Canary, Arlo, and Nest including geofencing and the ability to connect to third-party devices.
The Ring Alarm Home Security System offers an easy and relatively affordable way to make sure your home is safe and secure. The system can be installed in as little as 20 minutes and can be self-monitored using your mobile device or desktop system. Or, you have it professionally monitored by subscribing to the very affordable Ring Protect Plus Plan, which also includes unlimited cloud storage for any Ring camera you may own.
Biggest problem though is the ‘wake up’ time. You reported on it, but I didn’t really take the time to really consider, “Hey, if I want to catch the kids driving by banging mailboxes, by the time they drive by and the camera wakes up, they’re gone!’ Well, that’s just what I learned as I set everything up, had the ap working and started getting notifications when people drove by. I thought AWESOME! it works! Well, not so much. Unfortunately, the car is never seen on the video, so the purpose is pretty much defeated.

You can also mount the base station on a wall, and can connect to your wifi network, or you can connect directly to your router with a network cable. The Ring Alarm base station offers a 24-hour battery backup, plus it can connect to LTE if you have an outage, so you have a cellular option if needed; however, you do have to pay for it with a monthly subscription.
Where abode Wins: abode offers free cloud storage, and they offer the widest range of equipment including glass break and flood sensors which are viewed as essential home security devices. Also, abode uses an open platform allowing more third-party integrations via Z-Wave and Zigbee backed by their CUE automation engine. It’s true that Ring offers Z-Wave and Zigbee too, but details on compatible products are still scarce. Fourth, abode has more home security experience than Nest and Ring.
The Ring Alarm Home Security System offers an easy and relatively affordable way to make sure your home is safe and secure. The system can be installed in as little as 20 minutes and can be self-monitored using your mobile device or desktop system. Or, you have it professionally monitored by subscribing to the very affordable Ring Protect Plus Plan, which also includes unlimited cloud storage for any Ring camera you may own.
Standalone accessories can be added to your setup in a similar manner to those included in the base kit, although you'll have to scan a QR code on the back of them using the Ring app in order to get them to appear. From there, it's the same process of choosing the sensor type, naming it, assigning it to a room, and testing to make sure it's registering properly.
Expand Security With Other Devices Nest Cam, Nest Protect, Nest Thermostat, Nest Secure, Nest Hello, Nest Cam IQ Ring Stick Up, Solar Panel, Chime, Chime Pro, Ring Floodlight Cam, Ring Spotlight Cam, Ring Protect, Video Doorbell, Ring Beams Canary, Canary View Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon)

abode uses the abode app. If an event occurs, you will receive a notification on your phone. From the app, you can decide how to respond to events. You can review video footage, notify the police, the monitoring center, or even your family. You can also view sensor history and manage your rules. For example, you can create a “coming home” rule that turns on the lights and unlocks the door. And of course, you can use the app to arm and disarm the system.

Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
For the Ring Alarm to function properly, you'll need to subscribe to Ring's Protect Plus plan, which is $10 a month or $100 if you prepay for the year. It includes 24/7 professional monitoring, video recording, reviewing, and sharing for unlimited cameras, 10% off purchases made at Ring.com, and an extended warranty on all of your items as long as your subscribed.
The Ring mobile app recently got a facelift that gives it a more polished Dashboard featuring live preview windows. The Alarm controls are at the top of the Dashboard screen and include Disarmed, Home, and Away buttons. Below the buttons is the status of all installed sensors (cleared, open), and below that are tabs for viewing Neighbors posts and Event History.

You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.


Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.
Expand Security With Other Devices Nest Cam, Nest Protect, Nest Thermostat, Nest Secure, Nest Hello, Nest Cam IQ Ring Stick Up, Solar Panel, Chime, Chime Pro, Ring Floodlight Cam, Ring Spotlight Cam, Ring Protect, Video Doorbell, Ring Beams Canary, Canary View Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon)
I’m not certain about Nest, but I asked abode about this before. They said, “We have what is called abode Signal Guard. Unlike other smash and grab solutions, the Signal Guard works whether your system is self-monitored or professionally monitored. The abode Signal Guard alarm acts just like a normal alarm where notifications are sent and the siren(s) go off until the alarm is disabled. If you are a professionally monitored customer, the monitoring center is notified of the abode Signal Guard event.”

If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
FAST FREE USPS PRIORITY SHIPPING WITH TRACKING INCLUDED. SAME DAY PROCESSING IF PAID BY 5PM EASTERN TIME ZONE MONDAY THRU FRIDAY EXCLUDING HOLIDAYS. Up for sale a Used Ring Stick Up Cam Wire Free Outdoor Security Camera. The device works perfectly, but has some marks on exterior as seen in picture. This kit comes with new never used mounting hardware as well as seen in pictures.
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.

Great article with lots of useful information. Very comprehensive comparison that really helps people make a wise decision based on their particular needs. FYI, I chose abode for my home security needs because it’s a proven shipping product and it integrates well with other systems. Although the camera quality might not be as good as others, it will suffice for my needs.
Both the Ring Alarm and Nest Secure are easy to install by yourself. You don’t need to purchase professional installation, but both offer that option for an additional charge. Neither platform requires a contract, so you won’t be forced to pay monthly ongoing subscription fees. Both Ring and Nest also offer the ability to control your home security devices via a user-friendly app on your smartphone or tablet, making it simple to check in on things at home when you’re out and about. You’ll also get a notification on your device if the system detects anything out of the ordinary, so you’re always in the know about what’s going on at home.
Spotlight Cam also works with Ring Neighborhoods. With this feature, you can quickly share video clips with those nearby. You don’t have to invite your neighbors. Instead, Ring uses your set geolocation to find other nearby users. You can even customize your location by creating a smaller or larger shape around your home. By tapping on the Ring Neighborhood icon when viewing a call or recording, you can share that event with those nearby regardless of whether or not they own a Ring device. So long as your neighbor has the Ring app, you can share events with them. You can also choose to share events to Facebook and NextDoor.
Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.
Arlo Pro 2 also works with Arlo’s continuous video recording (CVR) plan. The catch is that the camera must remain plugged-in in order for the feature to work, and Arlo’s power cord is not weatherproof. The subscription is per camera and also works with Arlo Q, Q Plus, and Arlo Baby. For $9.99 per month, they will provide 14 days of 24/7 CVR, for $19.99 per month you get 30 days, and for $29.99 per month, you will get 60 days. Arlo provides a discount if you pay for the year upfront and they offer a 50% discount if you have more than one CVR plan on your account.

The video doorbell is what Ring is known for. This smart doorbell and home security camera lets you answer people at your door remotely and keep an eye on what’s going on at your house. You get alerts whenever someone pushes the doorbell or when the motion sensor registers activity. The live view shows you what’s going on and two-way talk lets you communicate through the device. It holds up well in many conditions with its weather-resistant design. Ring’s video doorbells are also equipped with night vision.
Through Works with Nest, abode works with Nest Protect, Nest Thermostat, and Nest Cam. Using this integration, you have the option to sync your abode modes with Nest modes or keep them separate. The abode system also offers deep integration with the Nest Thermostats. From the abode app, you can access and control your home’s temperature and create temperature thresholds. The same is true for ecobee users.
I have! That is a white box piece of hardware used by several companies so I actually have that same exact camera from another company. I don’t love it, but for the price, it’s a good choice. Of course, a huge portion of the experience is not just hardware, but user experience. I don’t know how Wyze will deliver on that side of the equation, but I’ve ordered a Wyze Cam for Bethuel to try, another writer on this site, can’t wait to hear his thoughts.
I haven’t had any issues with Arlo Pro, but I called their support team to get a feel for support quality. As Netgear owns Arlo, phone tech support is managed by Netgear, and they offer offshore support. It was the stereotypical experience you think of when you think of tech support. I called into a phone queue, waited a little bit (not long), got transferred to someone who struggled to understand my question, she put me on hold, she came back to clarify my question, she put me on hold, and then she came back with an answer. While it wasn’t a bad experience, it was sub-par compared to the tech support experiences provided by Nest, Canary, and Ring.
Arlo Pro is preprogrammed with four modes: Armed, Disarmed, Schedule, and Geofencing. Most of the modes are customizable, and you have the option of adding your own customized mode. You can even create different rules for different cameras. For example, armed mode on camera A might mean that if it detects motion or audio, it will record, while armed mode on camera B might mean that if motion is detected, it sounds the siren, but doesn’t record. You can also decide if you would like push alerts, email alerts, or no alerts.
It's a good replacement for those looking to lower monthly cost for professional monitoring. The system is easy to set up and there are lots of options. I'm not sure the set up could be any easier. Here is what I don't like, but not a deal killer. The sensors for the doors are huge! They are literally twice the size of the previous sensors from my old company. I also don't like that you only get one contact sensor in the base option. I have three doors to my house and 7 first floor windows. So, you have to buy quite a few additional sensors to cover them all. So, the initial cost can add up fast. But, since monitoring is cheap, it pays for itself after a few months. I have integrated a door bell camera and a spotlight camera for the yard. Those are both battery powered. Both are fairly bulky compared to some of the competition. I'm hoping it's durable though. The thing to remember if you get any battery powered devices is to get extra batteries. The batteries take a LONG time to charge. I have 4 batteries and each took about 8-10 hours to charge. If you have an "extra" charged battery or two around, then you don't have to take your cameras offline for a half day to wait for the batteries to charge. Just swap in the extra one and recharge the other and leave it waiting for the next time something dies. All in all, it's a good system, but not cheap to get setup properly initially. The intro price is good, but by no means a complete system. Unless you live in a one door apartment with no windows, you are going to need to buy additional stuff to complete the system. Hopefully, with the money i'm no longer paying to my old monitoring company, I can make up the upfront cost of setting this up.
Nest Cam’s software (Nest Aware) can’t be beat. Better yet, they continuously launch improvements to the software for all users. One of their more recent updates granted a limited amount of free snapshot access for both Nest Cam AND Dropcam users and recently, they dropped the entry price of Nest Aware. Nest Aware comes in three flavors: 5-days for $5 a month, 10-days for $10 a month, and 30-days for $30 a month.

Many alarm systems integrate base station and keypad functionalities into a single unit, but Ring has made an interesting decision to separate the two, recognizing that these don't always need to be colocated. The base station serves best located centrally in the home in order to optimize wireless connections to all sensors and to centralize the alarm sound, while the keypad is likely to be placed close to the main point of entry for easy access.


Ring’s sensors operate on battery power, the keypad and base station come with AC adapters, and the Z-Wave range extender plugs directly into an AC outlet. All three of those components have battery backup, so the system will continue to operate in the event of a power outage. The base station connects to your home network via hardwired ethernet or Wi-Fi. A Ring Protect subscription activates an LTE module in the base station that will keep the system connected to the internet if your broadband connection goes down. You can even run the keypad on battery power full time if you choose, since most homes don’t have AC outlets right next to doors. An LED will tell you when the battery needs to be charged.


Person Detection was the first feature launched under the Canary Vision project, a project that aims to add AI-powered intelligence to Canary devices. The second Canary Vision feature is Package Detection, which lets users set up notifications for when packages are delivered to their homes. This feature is exclusive to Canary Flex, and it can only be accessed if you have a Canary Membership.

Regardless of which model you choose, it’s recommended you connect your Spotlight Cam to your Wi-Fi network before mounting it outside. (In the case of the non-wired Spotlight Cams, you’ll first need to charge the battery using the supplied micro-USB cable.) Once you add the camera to the Ring companion app, the camera’s voice prompts guide you through the connection process.
×