The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.
Through Works with Nest, abode works with Nest Protect, Nest Thermostat, and Nest Cam. Using this integration, you have the option to sync your abode modes with Nest modes or keep them separate. The abode system also offers deep integration with the Nest Thermostats. From the abode app, you can access and control your home’s temperature and create temperature thresholds. The same is true for ecobee users.
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.
I'll be the first to admit, the thought of installing the alarm system on my own was a bit scary, and I didn't know that I would be able to get it done. I'm not exactly the handiest person, and my wife doesn't like things to be messy in our brand new house. Ring does an incredible job at making the unboxing experience extremely easy by labeling everything so you exactly what goes with what. In just under 90 minutes I was able to get everything out of the box and set up, including mounting the hardware.
Thanks for the all the info and reviews. I have a Ring Doorbell and a Nest Thermostat. It seems as a stand alone the nest cam is a better choice. But at $100/year seems a bit steep. Adding a Ring Spotlight cam will put me at $60/year (doorbell and cam). Seems like the Ring cam is a no brainer for my situation. Am I missing something? I dont mind upgrading my doorbell (Ring or Nest), but even with the new 5 day plan from Nest Aware, Ring just makes more financial sense.
Along the bottom of the screen are buttons for Event History, Device Health, Linked Chimes, Motion Settings, Motion Snooze, App Alert Tones, and Shared Users. The Event History screen offers a list of recorded activity. Tap any event to play a clip and share it with friends and family or with your neighbors by pressing the Ring Neighborhoods button. Ring Neighborhoods is a feature that lets you share recorded events with neighbors who have downloaded the app and signed up to participate. It is based on the location data entered during setup and allows you to add a comment along with your clip.
My indoor Canary is self-sufficient, and that is exactly what I want in a home security camera. Flex has yet to provide that same experience. I’ve had to physically interact with the device multiple times to get it to reconnect to my internet. Also, the geofencing feature is inaccurate, often marking me away while home and vice versa. As for power loss notifications? They’re hit or miss.
As soon as the alarm is tripped you will receive 2 phone calls (one on each registered number), if no one answers they will immediately dispatch the police. The approximate time for the police to be dispatched from the moment your alarm goes off to the time they call a dispatcher is about 4 minutes (that includes the time to complete the 2 call attempts made to you). Police will be dispatched with a description of the zone that triggered the alarm (ex: living room motion).
The original Ring has a battery option. I don’t know how I would feel about that because you do have to remove the doorbell to charge it. Ring claims it will last 6-12 months on a charge. If that’s true, that wouldn’t be so bad; however, I would expect it to last like 3-6 months. In my experience, when a company gives a top end battery life range, that’s how long it will last if you never use the device. All that said, I don’t know how hard it would be to move a wired doorbell to the front of your door.
You set up the Chime Pro, which also adds a chime sound to your motion detection alerts, in a process that’s similar to the camera installation: You plug it in to an AC outlet somewhere between your router and the camera to repeat the wireless signal. I used a spare outlet in my kitchen as that was roughly the halfway point between my living room router and the camera on the front of my house. Once the Chime Pro is plugged in, a voice prompt will tell you it’s ready to set up. You then add the device in the Ring app then follow the voice and app prompts to connect it to your wireless network.
The biggest disadvantage to many IoT/smart systems is the lack of an API. They are closed source and in reality are designed to lock you in to their products and offerings. If you’re happy with only buying say Ring products for everything and areas that they don’t have an offering you can’t integrate other products in, then you stuck with only what they offer.
If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
The Ring app will automatically detect the rest of the items that came pre-packaged with the base station once its initial set up is complete. You'll need to pull plastic tabs on each piece so that they can power up, and you'll want to do this one at a time. If you pull all the tabs at the same time, the system tries to connect to multiple devices at once and slows down the setup process.
UPDATE 16FEB2018: After two weeks, I must downgrade my review... it's become obvious that the Ring Floodlight Cam only detects motion during the day. At night, I can walk through the center of my defined motion zone, but the cam won't record until I'm within 10 feet of it. The defined zone is my driveway which is about 40 feet long and we have 3 cars. As long as the ne'er-do-wells only break into the car parked closest to the Ring cam, they will be recorded. A quick Google search for "ring cam won't detect motion at night" will yield many stories of the Ring product line failing to work in darkness. Apparently, the problem has been documented since September 2017 and Ring has failed to fix it. I must say that I'm beyond disappointed. At least I discovered this in enough time to send the cam back to Amazon for a refund.