Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
Ring's mission is to reduce crime in neighborhoods by creating a Ring of Security around homes and communities with its suite of home security products. The Ring product line, along with the Ring Neighbors app, enable Ring to offer affordable, complete, proactive home and neighborhood security in a way no other company has before. In fact, one Los Angeles neighborhood saw a 55 percent decrease in home break-ins after Ring Doorbells were installed on just ten percent of homes. Ring is an Amazon company. For more information, visit www.ring.com. With Ring, you’re always home.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
I installed the Spotlight Cam Wired at the front of my home, where there’s an outdoor outlet within the power cord’s 20-foot range. I put the Spotlight Cam Solar in the backyard, where there’s more unobstructed sunlight. Each camera comes with its own mounting tools, including a screwdriver, drill bit, mounting bracket and screw set with wall anchors.
Hi and thank you for the exhaustive review. I like the option of Ring Doorbell Pro. However, my existing doorbell is on the side of the house, facing parallel to the door across the front steps. If I mounted the Ring there, the camera would capture a profile of the visitor as they approach the door. It would not capture their face head on, would not (likely) capture them them as they approach the steps, which is where delivery people often leave packages (my interest in Ring, Arlo, etc., came out of the neighborhood social app conversation about a rash of package thefts), and would not capture the car they drive as it would face parallel to the street, not into the street. My question is: what would the installation of Ring look like on or near the front door, where there is no existing wiring? Is my existing setup enough to steer me away from Ring and toward a battery powered option?
When it comes to integrating your home alarms with the rest of your smart home, both Nest and Ring offer the option to purchase extenders. It may take a bit of time to figure out if you need one, since the size, layout, and materials in your home can all make a difference in creating dead zones on your property. Nest’s extender will set you back $70, while Ring’s is just $25.
The camera is powered by the same quick release battery pack used on the Ring Video Doorbell 2. It contains a mini USB charging port and is rated to last for six to twelve months between charges depending on camera and spotlight activity. The camera can hold two battery packs and will automatically switch over to the secondary battery when one runs out of juice. Additional battery packs are available for $29 each. If you prefer a wired solution, Ring sells a Spotlight Cam Wired model for $199.
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
Blink is also a battery-powered outdoor camera. It’s built around a unique chip that should provide an amazing battery life. However, while my indoor cameras are almost at the two-year mark using the original AA batteries, my Blink XT batteries usually last between 1.5 and 2 months. While I love my Blink indoor cameras, I would not recommend Blink for outdoor use. You can read my Blink XT review and comparison to Arlo Pro here.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
As soon as the alarm is tripped you will receive 2 phone calls (one on each registered number), if no one answers they will immediately dispatch the police. The approximate time for the police to be dispatched from the moment your alarm goes off to the time they call a dispatcher is about 4 minutes (that includes the time to complete the 2 call attempts made to you). Police will be dispatched with a description of the zone that triggered the alarm (ex: living room motion).
Ring offers access to a timeline-style feature where you can view events going back six months (if you are subscribed). From the timeline, you can sort through ring events, motion events, starred events, or live view events. From the web app, you can also sort by device so that you can separate your Spotlight Cam footage from footage captured by your other devices. Right now, the feature isn’t very advanced. Soon, Ring plans to completely revamp their mobile app.
Wow! I’m impressed that you read the whole thing. A mobile hotspot, right? I think they would all tell you that it’s possible, but not something they recommend. The signal isn’t going to be as reliable as connecting to a WiFi network. Arlo sells a 4G camera called Arlo Go, but it’s more expensive upfront and the monthly fee is higher as you’re paying for cellular connectivity.
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward. I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
The Ring mobile app recently got a facelift that gives it a more polished Dashboard featuring live preview windows. The Alarm controls are at the top of the Dashboard screen and include Disarmed, Home, and Away buttons. Below the buttons is the status of all installed sensors (cleared, open), and below that are tabs for viewing Neighbors posts and Event History.
Although this looks intriguing, my experience with Ring products is that they work about 75% of the time on our two cameras. And the problems are definitely with Ring, not our network - as sometimes our iPhone / iPad won't connect, but an Android device right next to it on the same network will connect just fine to the video. Occasionally it is the other way around, but sometimes nothing will connect to the Ring camera even though my home network is up and working fine. That's annoying for video alerts... but for a home alarm, I don't think I would trust them based on my experience with our Ring cameras.
haha. Don’t do anything that will make you sad :). I upgraded my internet package and purchased three Google Wifi routers to create a mesh network. Though this upgrade did nothing to improve Flex’s overall performance, it did help with connectivity a touch. Flex’s performance improves when plugged-in and it’s possible that the battery experience will improve over time. Canary has already proven their ability to make a product better – just think about where they started with the original Canary.
Post launch of Nest Cam IQ Indoor, Nest has announced that they are making an outdoor version of IQ. I’ve tested the indoor IQ and it is one of a few cameras that I’ve returned. In my opinion, the extra features (Person Recognition, Supersight, 4K Image Sensor, HD Talk and Listen, 12x Zoom, and HDR) don’t justify a price tag that is nearly double the original Nest Cam.
It’s not ideal, but it’s not terrible. I just went out there and stood sideways to the camera and you could still see me. The farther back I stood, the better the picture. Take a look at the article and scroll all the way to the bottom. I put two pictures up temporarily. Let me know once you see them as I’m going to take them down. I suggest buying it and testing it out using the battery by placing it where your current doorbell is BEFORE you actually install it. If you think it will work, go for it. If not, send it back.
The Spotlight Cam employs the common method of using bounding boxes over the camera image to define detection zones, but you can use the box handles to twist it into any kind of geometric shape, not just squares. That allows you to work around outdoor areas where you don’t have as much control over the environment as you do inside your home. There’s also a scheduling option to disable motion alerts during certain times of day.
Multi-Camera Discount Price Includes Shared Storage for 10 Cameras (Free Plan Supports 5.) Price Includes Shared Storage for 10 Cameras (Free Plan Supports 5.) $10/month or $100/year for Unlimited Ring Cameras $10/month or $100/year for Unlimited Ring Cameras Each Additional Camera Costs $2.50/month or $25/year Price Includes Shared Storage for 5 Cameras (Free Plan Supports 4)
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
Ring’s sensors operate on battery power, the keypad and base station come with AC adapters, and the Z-Wave range extender plugs directly into an AC outlet. All three of those components have battery backup, so the system will continue to operate in the event of a power outage. The base station connects to your home network via hardwired ethernet or Wi-Fi. A Ring Protect subscription activates an LTE module in the base station that will keep the system connected to the internet if your broadband connection goes down. You can even run the keypad on battery power full time if you choose, since most homes don’t have AC outlets right next to doors. An LED will tell you when the battery needs to be charged.
The keypad has 12 backlit buttons on the left-hand side and three in a circle on the right. You create a four-digit PIN during setup, which you’ll tap into the keypad when you arm and disarm the system (you can also do this from the Ring app, which is available for Android and iOS devices. It’s the same app used for Ring’s video doorbell and security cameras, although there’s currently little integration between the cameras and the security system.)
So what happens if an Alarm is triggered? If an event is detected, you will get an email and an instant push notification to your phone which you can swipe to open the Nest App. From the Nest App, you can see which sensor triggered the alarm, and you will be presented with two options: call the police or turn the alarm off. If you have a Nest Cam, you will be able to view footage from the event simultaneously. If you have multiple Nest Cams, you can swipe through to a view a live feed from all of your cameras. If you’re subscribed to Nest Aware, the Sightline feature will bookmark the event so next time you access your camera’s timeline, you’ll see a red bar. Tap on the red bar to review the footage of the event. Of course, while all of this is happening, your siren will sound.
EverCam is a newer option made by a Chinese company who has never made a security camera before. That said, despite their Kickstarter success, I’m hesitant to recommend the camera even though it boasts an impressive feature list. For one, they refused to answer my in-depth questions about the camera which makes me a little suspicious. Two, they are promising many AI-rich features without a monthly fee. As a consumer, I know that’s tempting, but I also know it’s unsustainable. Facial recognition, for example, does not live on the camera itself. The feature is cloud-based which is expensive to maintain; hence why you see companies like Nest charge a fee to access features that are heavy on AI.
The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
The Ring Video Doorbell 2 and Ring Stick Up Cam provide easy and effective ways to set up a pretty strong security perimeter around the outside of your home, but it could be made considerably stronger with the addition of the now-Amazon-owned company’s Spotlight Cam. This outdoor camera/porch-light hybrid, illuminates the area and records video when its motion sensor is tripped.