Although SimpliSafe's basic monitoring service goes for $14.99 per month for 24/7 monitoring, you have to pay an additional $10 more a month to control the system from your phone and to receive email and push notifications. Tack on another $4.99 per camera per month to record, download, and share video, and you're up to around $30 per month, which is three times what you'll pay for a Ring Protect Plus plan.
Away mode enables a countdown timer which you can set from anywhere between 30 seconds to 3 minutes. This gives you time to exit your home or cancel the alarm if need be. Once the timer reaches zero, a notification is pushed to your phone letting you know the system is armed. You’ll also hear an announcement (if you’re still in your house) through the base station that the house is now armed.
So, where does the professional monitoring come in? When the alarm is triggered, the Ring Alarm central monitoring system calls you and asks for the verbal security code you’ve set up. If Ring doesn’t reach you, they’ll call your emergency contact and ask for the same thing. If either of you forget the code (better choose something you’ll remember!) or if they’re unable to reach either person, then they’ll dispatch emergency responders to your house.
If that’s not possible, or if the floodlight feature is really important to you, I recommend either the Ring Floodlight (not tested but I have heard good things about it) or Ring Spotlight. Ring launched a new indoor camera at CES, so that might be an option. I need to dig into it more before I say yay or nay of course. Currently, Nest, Arlo Q, Arlo Pro, and Amazon Cloud Cam are my top recommended indoor cameras.
At this point you have to verify your address if you choose to sign up for professional home monitoring, otherwise, just agree to the Terms of Service to continue. The next screen gives you the option of adding the included devices, all of which are pre-paired. I removed the battery tape from the contact sensor and it was added immediately. Here you can choose how the device will be used (door, window), give it a name, and assign it to a room (or choose No Room Assigned). I used the double-sided tape to install the sensor on a window, tested it, and moved on to the keypad.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
Finally, I wouldn’t put too much weight into the Amazon review from 2015. Things have really changed since then, including the Nest app. The Nest app was a little slow going when first launched, but they’ve really improved it and added back features that were initially missing, though found within the Dropcam app, plus added new features like person detection.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
Ring Alarm supports a sensor bypass mode, which allows you to arm the system even if one of the sensors is currently tripped. For example, if you want to arm the alarm but leave a monitored window open, the system will notify you upon arming that one of the sensors is currently faulted. You can choose to close the window to clear the sensor or bypass it, which will arm the system but not monitor that sensor until the next disarm/arm cycle.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Unfortunately, though I purchased the Solar Panel version, the camera did not ship with Solar Panel installation instructions. The Solar Panel itself had an instruction pamphlet, but it’s picture book style, which is not my favorite. I decided to ignore all instructions and guess at the install, which wasn’t a good idea. After installation, the camera’s video feed kept flickering in and out (a problem which I have yet to resolve) so I went back through my install steps to see if I had messed up along the way. I had. I found Solar Panel installation instructions online which I recommend and followed step-by-step.
Finally, you can add third-party Z-Wave and Zigbee devices. abode has a list of compatible devices on their site. The list includes products by Aeon, Aeotec, Enerwave, Fibraro, First Alert, FortrezZ, GE, Linear, Kwikset, Leviton, Schlage, Iris, Sensative, ZooZ, and Netvox. abode also sells their own Home Automation Power Outlet & ZigBee Extender. The device will turn any outlet into a smart outlet, allowing you to control plugged-in devices and include them as part of your automation recipes. The switch also acts as a ZigBee range extender.
Through Works with Nest, abode works with Nest Protect, Nest Thermostat, and Nest Cam. Using this integration, you have the option to sync your abode modes with Nest modes or keep them separate. The abode system also offers deep integration with the Nest Thermostats. From the abode app, you can access and control your home’s temperature and create temperature thresholds. The same is true for ecobee users.
UPDATE 16FEB2018: After two weeks, I must downgrade my review... it's become obvious that the Ring Floodlight Cam only detects motion during the day. At night, I can walk through the center of my defined motion zone, but the cam won't record until I'm within 10 feet of it. The defined zone is my driveway which is about 40 feet long and we have 3 cars. As long as the ne'er-do-wells only break into the car parked closest to the Ring cam, they will be recorded. A quick Google search for "ring cam won't detect motion at night" will yield many stories of the Ring product line failing to work in darkness. Apparently, the problem has been documented since September 2017 and Ring has failed to fix it. I must say that I'm beyond disappointed. At least I discovered this in enough time to send the cam back to Amazon for a refund.