I got my new Ring security system yesterday and installed the panel, door sensor, and motion sensor yesterday. I have had a security system with a major national monitoring company for nearly six years. I am not new to this. I got the new Ring system to replace the current system I have due to the price of the monitoring. I like the idea of having $10 a month for all of my cameras and security system combined. By switching, I am able to save $55 a month by cancelling my previous monitoring from the companies that did so for my security system and cameras.
When you add the keypad, you’re asked to come up with a four-digit PIN that you’ll use to arm and disarm the system. If you opt in to professional monitoring, you’ll also need to come up with a verbal passcode that you’ll use to identify yourself as an authorized user when the monitoring service calls (so be sure to provide this information to your secondary contact, as they’ll need it as well).
Second, you can take it to the next level with Ring Locations. The Locations feature lets you assign your different devices to different locations under one account. You can then decide who has access to each location. For example, this could theoretically solve the challenge I described above. If I had a camera at my grandmother’s, I could give access to my family, but exclude them from viewing footage from cameras located at my home. When the new app launches, you will also be able to view location-based grouping backed by a multi-camera view.
The Ring Spotlight Cam Battery is ideal for users who want to monitor what's going on outside but don't want to be bothered with electrical wiring. Installation is a breeze, and with two battery packs installed you can get up to two years of power between charges. The Spotlight's motion sensor shined bright in testing, and the camera's 1080p day and night video was sharp. As with other Ring devices, the Spotlight can be integrated into a Wink or SmartThings home automation environment, and it works with IFTTT and Alexa voice commands as well as several other third-party devices. However, you have to subscribe to a Ring Protect plan to view and share recorded video.
Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
You can set motion zones for the lights, too. In this case, the app shows a graphic representation off the motion sensor’s 270-degree range, and you can define where you want movement to turn on the lights by tapping up to three preset zones and then expanding or reducing coverage in those zones using a slider. Depending on your settings, the light will stay on for one to 15 minutes.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.